|
| Rick_Deckard |
|
|||
|
Hey lads,
Just wanted to know if I need a special primer to go on (before my chrome) paint on semi-bare metal. I'm doing this to my spare Fairmont grill surround. I have some plastic primer and black and white spray paint. Can I use any of this stuff as primer? Or do I have to head down to super cheap and get some special metal primer? O and I'm right to use my normal clear coat on metal (after chrome paint)? Cheers.
_________________ E39 523i |
|||
| Top | |
|||
| Leroy |
|
||
|
if it is bare metal it will need primer. if it is already painted you should be right to just sand it back a little and paint over it
_________________ Now driving a Hilux |
||
| Top | |
||
| Rick_Deckard |
|
|||
|
Well it's semi-bare mate, lol. Some areas the paint was cracked and bubbled, so had to scrub them right back. So I go buy some primer?
_________________ E39 523i |
|||
| Top | |
|||
| Leroy |
|
||
|
if it has cracked and its now part bare metal you might be better off sanding it all back to bare metal. that way you will get a smooth surface, no ridges etc etc.
what sort of grille is this off? was it painted a colour or chromed?
_________________ Now driving a Hilux |
||
| Top | |
||
| Rick_Deckard |
|
|||
|
Here is a picture.
I did a medium strength sand with a a*** sandpaper then a light sand with a fine sandpaper. To the touch, it is all very smooth and level. Note the big batch of metal at the top is when I thought I could sand it back to a nice finish, lol.
_________________ E39 523i |
|||
| Top | |
|||
| Leroy |
|
||
|
hmm i always thought they were plastic. oh well.
if it is metal then i would just do a couple light coats of primer on the top half, kind of blending it in with the sourrounding areas. if that makes sense
_________________ Now driving a Hilux |
||
| Top | |
||
| Rick_Deckard |
|
|||
|
Right you are, cheers. Off to super cheap we go.
_________________ E39 523i |
|||
| Top | |
|||
| Timmeh |
|
||
|
Septone automotive Super Etch Primer is what I have used. I used it on my XR 8 bonnet vent grills.
Then I coated with 3 coats of Australian Export black gloss enemal paint. Came up a treat. |
||
| Top | |
||
| Leroy |
|
||
|
that export stuff is great i reckon. if you dont need the exact colour matched. like a gloss black or something.
_________________ Now driving a Hilux |
||
| Top | |
||
| Razor7107 |
|
|||
|
apply 2-3 coats of primer making sure you sand each layer back with 2000 grit making it smooth before applying the next layer,
_________________
|
|||
| Top | |
|||
| Rick_Deckard |
|
|||
|
Okay, letting last coat of primer dry now, then I'll give another lite sand.
_________________ E39 523i |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 97 guests |
