|
| nightstalker |
|
||
|
The quarter window outer trim on the rear doors of my EL has deteriorated that bad on both sided that I need to replace them. I have had a quick look and cant work out how to remove them from the door, anyone know how to remove them.
|
||
| Top | |
||
| phongus |
|
|||
|
I think the surround and rear quater windows are all one unit, so to take them out you have to take the whole lot out. To replace it, you have to replace the whole lot.
I think they are pretty dear from Ford. phong =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| nightstalker |
|
||
|
Your saying the quarter window is attached to the trim piece in question..
|
||
| Top | |
||
| millard455 |
|
|||
|
nightstalker wrote: Your saying the quarter window is attached to the trim piece in question..
yep, he sure is. its glued in. remove the trim on the inside of the quater window and with a very sharp blade slowly cut arround the edge of the window until you cut through all the glue and then it will pop out, not an easy job. if you want a pic of the trim and window to get an idea have a look in my thread "whos sick of thoes crappy exterior trims" page 3 there is a pic of the new one i bought from ford. good luck
_________________ EL XR8 SERIES 2, 5SPD, HOT CHILLI RED, 200 ODD RWKW OF V8 FUN AND GAMES |
|||
| Top | |
|||
| nightstalker |
|
||
|
May I be as bold to ask how much you payed for the new trim piece.
|
||
| Top | |
||
| nightstalker |
|
||
|
Never mind.. just read that thread and nearly fell off my chair when I saw the price.. Might try and source a pair from a wreckers that arent to bad..
|
||
| Top | |
||
| MadMatt |
|
|||
|
Over $300.
_________________ Member Number 8804 |
|||
| Top | |
|||
| millard455 |
|
|||
|
nightstalker wrote: Never mind.. just read that thread and nearly fell off my chair when I saw the price.. Might try and source a pair from a wreckers that arent to bad..
lol. i made sure i was sitting down when i rang ford to get the price. if you get a good one from a wreck give that trim dream a go, atleast it wll stop it going crapy and grey.
_________________ EL XR8 SERIES 2, 5SPD, HOT CHILLI RED, 200 ODD RWKW OF V8 FUN AND GAMES |
|||
| Top | |
|||
| nightstalker |
|
||
|
I have just been quoted by a large Sydney Ford Dealership for the quarter windows for my EL.. you might wanna sit down first...... $182.50 each !! but to their defense they did say that they would not change any freight on them.
Part numbers are as follows LH - EL F25831 A RH - EL F25830 A |
||
| Top | |
||
| millard455 |
|
|||
|
nightstalker wrote: I have just been quoted by a large Sydney Ford Dealership for the quarter windows for my EL.. you might wanna sit down first...... $182.50 each !! but to their defense they did say that they would not change any freight on them.
Part numbers are as follows LH - EL F25831 A RH - EL F25830 A i think they might have already put postage on that as i paid $150 for the rh side one less than a month ago. mix up some dish washing liquid and water in a squrtie bottle and spray that on the black glue before you start cutting as it helps make the glue softer. good luck mate, prick of a job. also it would be worth getting some TRIM DREAM, this will stop the new trims going like the old ones did and it turns them nice and black.
_________________ EL XR8 SERIES 2, 5SPD, HOT CHILLI RED, 200 ODD RWKW OF V8 FUN AND GAMES |
|||
| Top | |
|||
| Timmeh |
|
||
|
So those rear ¼ windows were just the trims and not the glass as well?
Damn I thought it was the whole lot. |
||
| Top | |
||
| millard455 |
|
|||
|
Timmeh wrote: So those rear ¼ windows were just the trims and not the glass as well?
Damn I thought it was the whole lot. yeah it is the whole lot, the trim and glass is all one piece. the glass is molded into the trim. congrats on the fag position mate.
_________________ EL XR8 SERIES 2, 5SPD, HOT CHILLI RED, 200 ODD RWKW OF V8 FUN AND GAMES |
|||
| Top | |
|||
| Timmeh |
|
||
|
Oh so you have to unstick the glass from the body is that what your saying?
Thanks for the congrats. |
||
| Top | |
||
| millard455 |
|
||||||
|
Timmeh wrote: Oh so you have to unstick the glass from the body is that what your saying?
Thanks for the congrats. well your realy unsticking the trim from the door as the glass is molded into the trim. once you have removed the little interior quater window trim (3 or 4 screws) you can see where the quater window and trim is glued in place. then ya spray some dish liquid on the glue that you can see and run a new stanley knife blade between the trim/window and the door until you cut through all the glue. here is a pic of the trim/window i removed looking at the side that glues to the door. the red lines are where the line of glue is that you need to cut through. dont laugh at my crapy computer skills.
_________________ EL XR8 SERIES 2, 5SPD, HOT CHILLI RED, 200 ODD RWKW OF V8 FUN AND GAMES |
||||||
| Top | |
||||||
| Timmeh |
|
||
|
What adhesive are you going to use/have used to put the new one in with?
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 89 guests |
