|
| 4dlvr |
|
||
|
is it just me or is removing the top for bolts a absolute mofo....
ive been trying for the past 3 minutes with no success.. can some one please point me in in the right direction, or give a tip???
_________________ 96 EF FAIRMONT |
||
| Top | |
||
| XRfairmont67 |
|
|||
|
get a 10mm tube spanner, local hardware sells em. or a 1/4 drive deep socket will work too.
|
|||
| Top | |
|||
| hans hartman |
|
||
|
{USERNAME} wrote: get a 10mm tube spanner, local hardware sells em. or a 1/4 drive deep socket will work too. no end to the tools,i just bought a set of torx sockets for power steering pump,becoming a tool collector-----for fords
_________________ R.I.P HANS HARTMAN |
||
| Top | |
||
| 4dlvr |
|
||
|
tube spanner doesn't work, the bolt is on a angle, and the end of the spanner hits the bonnet before the spanner could get hold of the bolt..
_________________ 96 EF FAIRMONT |
||
| Top | |
||
| XRfairmont67 |
|
|||
|
most tube spanners ive seen are about 150mm long, use a deep socket then or spend half an hour using pointy nosed pliers
|
|||
| Top | |
|||
| OZBMX |
|
|||
|
Yeah 10 mm deep socket, supercheap has kit of half a dozen or so for like 10-20 bucks, frankly a bloody useful thing to have in general, but I've done it with a standard sockets and pliers etc, shove the socket on the put the pliers over the thread and into the socket, give you something to turn the socket, or you could easily enou make something, just depends how handy you are. Although, I've also done it with pliers on there own, there not normerly that tight, although i recently had 1 that was, but it had been in t***, so you gotta expect some issues...
_________________ Signature removed by moderator.signature must not exceed 120x500 pixles |
|||
| Top | |
|||
| 4dlvr |
|
||
|
f#*kn hell.. even a 10mm deep socket wont do it..
i thought i was retarded but i went to a body shop today and the guy begged me to go some where else because of how much of a c#nt they are. im going to drill the ring to break it and then replace it with another.. bad idea??
_________________ 96 EF FAIRMONT |
||
| Top | |
||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
wtf, the tube spanner will remove the nut in a few seconds, ive had my fairmont grille on/off heaps of times.
i dunno whats going on there?.... maybe someone has done a bodgy job of affixing the grille to the bonnet 
|
||
| Top | |
||
| 4dlvr |
|
||
|
im very confused mate..
ill get a pic tomorrow, im paranoid now
_________________ 96 EF FAIRMONT |
||
| Top | |
||
| EFFII |
|
||
|
Paul come to my work and il do it for you!
|
||
| Top | |
||
| 4dlvr |
|
||
|
my mates going to give it a go tomorrow, if he cant do it. ill come past..
_________________ 96 EF FAIRMONT |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 27 guests |
