|
| GaryH |
|
||
|
All sorted thanks guys. Mine was just a little awkward because of the custom bullbar support bracket. I ended up just putting a bend in a spanner for clearance and could access the bolt
Last edited by GaryH on Sun Mar 06, 2022 11:46 pm, edited 1 time in total. |
||
| Top | |
||
| Mad2 |
|
|||
|
from memory the indicator is screwed to the headlight with two screws. unclip the indicator globe from it's mount before removing headlights. and i seem to remember 4 bolts holding the headlights in?, two on top, one to the left of headlight & underneath [looking at the headlight], with the other on the side of the radiator support [need to remove grille to get too]. that's EA to EB with i'm pretty sure the ED being the same.
|
|||
| Top | |
|||
| 93EB |
|
|||
Age: 47 Posts: 2486 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
Mad is right but there are 3 screws. 2 on top and 1 beside ac condensor. The indicators are indeed screwed to the headlight with 3 screws and is removed as 1 lot.
And you do not need to remove the headlights to remove the bar as far as i can remember.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| Mad2 |
|
|||
|
{USERNAME} wrote: Mad is right but there are 3 screws. 2 on top and 1 beside ac condensor. The indicators are indeed screwed to the headlight with 3 screws and is removed as 1 lot. And you do not need to remove the headlights to remove the bar as far as i can remember. ahhh ..... beeen awhile 
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 24 guests |
