|
| GASSA |
|
||
|
I have removed the door moulds on a el whats the way to remove the double sided tape off the doors
_________________ When the clutch drops the bull s**t stops!!!!! |
||
| Top | |
||
| fairmont599 |
|
||
Posts: 1135 Joined: 27th Oct 2005 |
Heat it up a bit with a hair dryer or heat gun, then roll your thumb accross it till it balls up. Will take f**k ages to do but it gets it off. oh and your thumb will probably hurt too:P
|
||
| Top | |
||
| josho89 |
|
|||
|
try some kerosine! put some on a cloth and give it a good rub, should break it down
|
|||
| Top | |
|||
| josho89 |
|
|||
|
but if its a solid color(white or red) dont! may stain it
|
|||
| Top | |
|||
| millard455 |
|
|||
|
try "oomph" glue remover. get it from the supermarket in the cleaning isle for about $5, works great for removing sticky residue.
_________________ EL XR8 SERIES 2, 5SPD, HOT CHILLI RED, 200 ODD RWKW OF V8 FUN AND GAMES |
|||
| Top | |
|||
| Private9 |
|
|||
|
I find either heat via a hairdryer, or eucalyptus oil the easiest.
|
|||
| Top | |
|||
| alfy |
|
|||
|
try a bit of De-Solvit on it. its a citrus based stain/sticky s**t remover and it wont hurt your paint.
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| Ugly Igley |
|
|||
|
Private9 wrote: I find either heat via a hairdryer, or eucalyptus oil the easiest.
When I removed the pin stripes I found doing a rub across of eycalyptus oil, let it sit for a little bit, then applied heat using a hair dryer to remove.
_________________ Proud owner of one of very few BF SR manual (June 06 build) |
|||
| Top | |
|||
| GASSA |
|
||
|
ALL GOOD BOYZ REMOVED THE TAPE I USED THE HAIR DYER AND THUMB METHOD BUT YOUR RIGHT FAIRMONT 599 IT DOES HURT YOUR THUMB
 BUT ALL GOOD THANKS FOR THE ADVICE 
CHEERS GASSA
_________________ When the clutch drops the bull s**t stops!!!!! |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 94 guests |
