|
daniel000 |
|
||
|
Hey everyone, sorry if this has been asked but i thought i might aswell ask it.
Got some shocks and springs the other day and ive been told how to change them over but just would like a few more tips and extra pointers on how to change the rears on my own. thanks daniel |
||
Top | |
daniel000 |
|
||
|
anyone?
|
||
Top | |
samftr |
|
|||
|
rear springs are a piece of piss mate, have you got a sedan or a HAWT wagon?
what model car?
_________________ 175.7hp 15.5 @ 374,000km
|
|||
Top | |
daniel000 |
|
||
|
oh nah i got sedan EF Fairmont
|
||
Top | |
samftr |
|
|||
|
rears are pretty easy:
you undo the bottom bolt holding the strut in, and the top nut and it should drop out jack the car up and support it on chassis stands to make it easier. fronts are a bit harder.
_________________ 175.7hp 15.5 @ 374,000km
|
|||
Top | |
Luxo Sprint |
|
|||
|
i'll try in bit more detail this time
remove plastic mounds behind the rear seat undo the shock bolts there chock front wheels jack up the rear (off the body) until the shock pins become loose remove the shock (compress it and remove by hand or lever bar) remove the spring place new shock or shock removed in place compress the shock fit in where it goes fit the spring uncompress the shock until it reaches shock mounts (may have to lower bits at a time) tighin bolts lower car back down make sure the spring is sitting in place correcty ummm i think the flat end of the spring is the diff end i cant remember u may a spring compresser if ur using shorter shocks im not sure i didnt need em while ur doing it check all bushes and replace if needed thats about all i can think of best to get a mate to help ya gets much easyer think of it as a puzzle u may have to be ruff getting the old springs out dont be worryed about going to town on the springs with a lever bar 1 more thing while working with wheels off the car put the car body on axle stands trolleys can s**t it or fall off etc hope i could help |
|||
Top | |
Paulmac |
|
||
|
Workshop manuals have diagrams and pictures too, you should have one if you attempt the fronts yourself. It can be done easier, quicker and safer when following the manual. Save you money too.
Cheers, Paul
_________________ What goes around, comes around. |
||
Top | |
samftr |
|
|||
|
Yeah paul, thats the one. I shouldn't reply on here when half asleep/knackered from work
good luck there wippersnapper
_________________ 175.7hp 15.5 @ 374,000km
|
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 49 guests |