Fordmods Logo

sunroof 

 

Page 1 of 1 [ 6 posts ] 

 
 Post subject: sunroof
Posted: Sun Feb 05, 2012 9:41 pm 
Getting Side Ways
Offline

Age: 24

Posts: 636

Joined: 5th Jan 2008

Location: Egg
SA, Australia

hi

with a sunroof, how do people fit them and whats the best ways of fitting them,

what brackets and bolts are needed.

is a crash repairer cutting a roof off and welding a new one that already has a sunroof going to be ok or is it going to affect it too much
Top
 Profile  
 
 
 Post subject: Re: sunroof
Posted: Mon Feb 06, 2012 9:15 pm 
Fordmods Junkie
Offline
User avatar

Posts: 11752

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia

{USERNAME} wrote:
hi

with a sunroof, how do people fit them and whats the best ways of fitting them,

what brackets and bolts are needed.

is a crash repairer cutting a roof off and welding a new one that already has a sunroof going to be ok or is it going to affect it too much


are you getting an aftermarket one or the same ones that are put on Fords?

EDIT: Forgot to add. If you are getting a Hollandia (sp?) sunroof installed you just have to get the roof cut where the stock one would sit (has to be a good cut) and it pretty much would just bolt in. Run the wires and also the draining hoses (4 hoses...one on each corner)...pretty sure someone on this forum has done it and had a doco or build thread...can't remember who did it though.

You don't have to chop your roof off and put another one...I think that's going a bit far for a sunroof...you might as well make it a convertible...

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)

Top
 Profile  
 
 
 Post subject: Re: sunroof
Posted: Mon Feb 06, 2012 10:53 pm 
Tyre Shredder
Offline

Posts: 329

Joined: 20th Apr 2011

Ride: 1991 eb1 fairmont

Location: townsville
QLD, Australia

benj has done it to his eb1 wagon with a write up in his build thread
Top
 Profile  
 
 
 Post subject: Re: sunroof
Posted: Mon Feb 06, 2012 11:23 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 1507

Joined: 14th Aug 2009

Gallery: 12 images

Ride: BA XT V8

Location: Gosnells, Perth
WA, Australia

Fuk the sunroof go the covertable. Lol

 

_________________

BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%.
13.65@102mph. 2800 hi-Stall.
230RWKW@5250 rpm. 625NM.

Top
 Profile  
 
 
 Post subject: Re: sunroof
Posted: Mon Feb 06, 2012 11:46 pm 
Fordmods Newbie
Offline

Age: 28

Posts: 3

Joined: 3rd Feb 2012

Location: hervey bay
QLD, Australia

{USERNAME} wrote:
{USERNAME} wrote:
EDIT: Forgot to add. If you are getting a Hollandia (sp?) sunroof installed you just have to get the roof cut where the stock one would sit (has to be a good cut) and it pretty much would just bolt in. Run the wires and also the draining hoses (4 hoses...one on each corner)...pretty sure someone on this forum has done it and had a doco or build thread...can't remember who did it though.

where and how much?
Top
 Profile  
 
 
 Post subject: Re: sunroof
Posted: Tue Feb 07, 2012 12:49 pm 
Fordmods Junkie
Offline
User avatar

Posts: 11752

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia

{USERNAME} wrote:
{USERNAME} wrote:
{USERNAME} wrote:
EDIT: Forgot to add. If you are getting a Hollandia (sp?) sunroof installed you just have to get the roof cut where the stock one would sit (has to be a good cut) and it pretty much would just bolt in. Run the wires and also the draining hoses (4 hoses...one on each corner)...pretty sure someone on this forum has done it and had a doco or build thread...can't remember who did it though.

where and how much?


Sorry can't help you there. Might be able to pick one up from the wreckers...if you're lucky.

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 6 posts ] 

Who is online

Users browsing this forum: No registered users and 58 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Dec 23, 2024 4:43 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names