|
| Puppy90 |
|
||
|
I heard that you can hook a sub and amp upto a stock bf stereo? jus wana know how to take the trim off to access behind the stereo?
|
||
| Top | |
||
| BEAR80 |
|
|||
Age: 44 Posts: 683 Joined: 4th Mar 2010 Ride: BF Fairmont Ghia & TS Magna Location: central coast |
{USERNAME} wrote: I heard that you can hook a sub and amp upto a stock bf stereo? jus wana know how to take the trim off to access behind the stereo? i asked a simmilar question before and here is the answer i got {USERNAME} wrote: pull the silver surround off from around your auto shifter, undo 2 screws (1 on each side) that hold on the banana shaped plastic bits, pull them off, 2 screws and 1 plug to remove the tissue box holder, 2 screw at the lower sides of the icc and 1 up top under the triangle bit above the icc (this just un clips from the windscreen side of it) hope this helps cheers, bear |
|||
| Top | |
|||
| Puppy90 |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: I heard that you can hook a sub and amp upto a stock bf stereo? jus wana know how to take the trim off to access behind the stereo? i asked a simmilar question before and here is the answer i got {USERNAME} wrote: pull the silver surround off from around your auto shifter, undo 2 screws (1 on each side) that hold on the banana shaped plastic bits, pull them off, 2 screws and 1 plug to remove the tissue box holder, 2 screw at the lower sides of the icc and 1 up top under the triangle bit above the icc (this just un clips from the windscreen side of it) hope this helps cheers, bear Sweet thanks mate ill give it a shot |
||
| Top | |
||
| data_mine |
|
|||
|
Make sure you know what you want to do.
The aux input won't help you adding an amp to the ICC. To add an amp, you need to either mod the ICC to add RCA outputs, or use line level converters on the speaker wires to provide RCA signal to the amp, or use an amp with high level inputs.
_________________ 1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow |
|||
| Top | |
|||
| Puppy90 |
|
||
|
oh ok i was told the the icc already has rca outputs, he musnt know wat hes on about ne ways..
so how exactly do i mod the icc so i can run a sub and amp? |
||
| Top | |
||
| data_mine |
|
|||
|
{USERNAME} wrote: oh ok i was told the the icc already has rca outputs, he musnt know wat hes on about ne ways.. so how exactly do i mod the icc so i can run a sub and amp? I think there's instructions on here, but it's not an easy job, great way to cost you a lot of money if you f**k it.
_________________ 1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow |
|||
| Top | |
|||
| arm79 |
|
|||
|
{USERNAME} wrote: so how exactly do i mod the icc so i can run a sub and amp? There is a document on the XR6T forums if your game enough to do it yourself. A better idea would be {DESCRIPTION} This is what I did, as you get a proper amp trigger from the ICC. |
|||
| Top | |
|||
| Puppy90 |
|
||
|
ill have a look, thanks mate
|
||
| Top | |
||
| Puppy90 |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: oh ok i was told the the icc already has rca outputs, he musnt know wat hes on about ne ways.. so how exactly do i mod the icc so i can run a sub and amp? I think there's instructions on here, but it's not an easy job, great way to cost you a lot of money if you f**k it. so i take it thats not the best idea, is it hard to install line level converters on the speaker wires? Will it cost as much as getting the icc modded? |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 55 guests |
