|
| gogetta |
|
|||
|
so ive got the dreaded code 32 that so many others get when they do the dash out job...
jobs like this s**t me... traded one problem for anther....now I dont have a f**k heater core but a s**t annoying airbag light instead....and now i need to pay for aircon gas that will probably leak away beacuse I had to disconnect the A/C line...whine whine I know!! reckon its possible the module shat itself or have i likely left off a plug?? I didnt disconnect the battery at all during the job because i was lazy...could have that f**k it?? does code 32 mean that the open circuit is between the module and the airbag? or possibly something else
_________________ |
|||
| Top | |
|||
| gogetta |
|
|||
|
next question...where is and what does the PAB 2 ohm resistor look like....
is it on the yellow lead near the glovebox or is it the tiny sqaure grey plug thing?
_________________ |
|||
| Top | |
|||
| gogetta |
|
|||
|
next question...the manual shows something called a shorting link on the PAB circuit.....never heard of a shorting link WTF is one?
_________________ |
|||
| Top | |
|||
| gogetta |
|
|||
|
ok still doing it...
found the pab resistor and it is connected, also main airbag is connected.... i can see its decided to be a fu..en a**hole for no reason...may have to pull the globe out so it doesnt s**t me every time i look at it
_________________ |
|||
| Top | |
|||
| OZBMX |
|
|||
|
I wish, it beeps at you if you do that.
_________________ Signature removed by moderator.signature must not exceed 120x500 pixles |
|||
| Top | |
|||
| snap0964 |
|
|||
|
gogetta wrote: next question...the manual shows something called a shorting link on the PAB circuit.....never heard of a shorting link WTF is one? On certain connectors when they're unplugged, a link will short the pins - have a look at the connector on the drivers airbag - a bit of static electricity on fingers mightn't be good for it.gogetta wrote: main airbag is connected.... Including the lower steering column plug ???gogetta wrote: i can see its decided to be a fu..en a**hole for no reason...may have to pull the globe out so it doesnt s**t me every time i look at it As mentioned, you're s**t out of luck there . . . .
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| gogetta |
|
|||
|
ah snap ive read a few of your other posts and u seem to be THE MAN on this issue..
i see the shorting clip is there to protect against accidental deployment...cool to know Q. i have shorted the driver airbag plug and also pAB plug (one at a time not at the same time) in order to try and get code 34 but its still showing 32 no matter what i tried... either there is on open circuit somewhere else in the wiring or its looking like buggered module... is that the right way to test?
_________________ |
|||
| Top | |
|||
| snap0964 |
|
|||
|
gogetta wrote: main airbag is connected.... Including the lower steering column plug ???
^^^^^This might save you some hassle if you answer my question.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| gogetta |
|
|||
|
yea that is definitely connected...didnt check the one under the wheel because i didnt take the wheel off
_________________ |
|||
| Top | |
|||
| snap0964 |
|
|||
|
Disconnect the lower steer column plug and short the plug out and see if the code changes.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| gogetta |
|
|||
|
snap0964 wrote: Disconnect the lower steer column plug and short the plug out and see if the code changes.
done that and nothing... still 32 do u know it there is another plug between the PAB resistor and the module...maybe i missed reconnecting it if there is one
_________________ |
|||
| Top | |
|||
| gogetta |
|
|||
|
starting to seriously consider that it may be the module...
in preparation how many different modules did ford produce.. im guessing 1. all EF had the same 2. EF2 has same as EF1 but also a different one for dual airbag 3. EL different to EF2 just because they like to change things, also codes cant be reset on late EL so that would indicate updated hardware so i guess im looking for a non PAB module from an EF1 or EF2...can u confirm
_________________ |
|||
| Top | |
|||
| snap0964 |
|
|||
|
There were a couple of variants, but all EF/EL airbag modules support a drivers and passengers airbag.
gogetta wrote: do u know it there is another plug between the PAB resistor and the module...maybe i missed reconnecting it if there is one Code 32 is for the drivers airbag ????
I'd unplug and replug the module.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| EF-MattyB |
|
|||
|
Hey mate, u had the exact same thing happen to me (code 32) when i took the dash out.
I thought stuff ya, ill take the bulb out. But them it beeps, so i went one better and put a little bit of black tape over where the light shines through. Fixed the beeps, fixed the flashing light. So next time i take the dash out, everything is going to be triple checked!!!!!
_________________ 99 AU Fairlane Ghia V8 Black Leather, 19" ANZ 5+5's with 245/35 rubber |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 46 guests |
