|
| peaandham |
|
|||
|
Ok question after searching 112 Pages of Interior Mods is can the Au Center console go straight into an EB that is an AUTO ? I Know it goes straight into manuals but I tried but it wouldnt seem to fit after i was told it was a standard swap ! I got it from a wreckers but when i tried to fit it the auto shifter was in neutral and would not go any further up because the hole was not up far enough but im fair sure it was as far as it could go. So i returned it to the wreckers but i am hoping this mod is not over, other wise i will have to custom make some drink holders !
Edit: Shifter was in Neutral not reverse so even worse !
_________________ OLD CAR: EB II Falcon, Everglade Green, 250thous (Rough Guess), Wildcat Extractors, 2.5 Exhaust with Muffler + Hot Dog, 18 Inch Rodney Jane Mags, XH Snorkel, EA MPEFI Tubing ! Last edited by peaandham on Tue Aug 04, 2009 12:36 am, edited 1 time in total. |
|||
| Top | |
|||
| Froudey |
|
||
|
it does work, you need to move the console back about 2 inches...
is your car manual or auto?
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| peaandham |
|
|||
|
Auto
What do you mean move it back about 2 inches it needs to go forward so the shifter can go up into park let alone reverse
_________________ OLD CAR: EB II Falcon, Everglade Green, 250thous (Rough Guess), Wildcat Extractors, 2.5 Exhaust with Muffler + Hot Dog, 18 Inch Rodney Jane Mags, XH Snorkel, EA MPEFI Tubing ! |
|||
| Top | |
|||
| B0XCAR |
|
|||
|
Sorry dident reply to ya msg Lol
http://fordforums.com.au/showthread.php ... re+console all ya need  has it all in there
|
|||
| Top | |
|||
| peaandham |
|
|||
|
But the shifter rods are different from Auto to Manuals arent they?? and i though that, that was the reason mine wouldnt fit ! If so Has anyone done it without changing the shifter to something out of an EF/EL/AU?
_________________ OLD CAR: EB II Falcon, Everglade Green, 250thous (Rough Guess), Wildcat Extractors, 2.5 Exhaust with Muffler + Hot Dog, 18 Inch Rodney Jane Mags, XH Snorkel, EA MPEFI Tubing ! |
|||
| Top | |
|||
| peaandham |
|
|||
|
Anyone know anything about this problem?
_________________ OLD CAR: EB II Falcon, Everglade Green, 250thous (Rough Guess), Wildcat Extractors, 2.5 Exhaust with Muffler + Hot Dog, 18 Inch Rodney Jane Mags, XH Snorkel, EA MPEFI Tubing ! |
|||
| Top | |
|||
| B0XCAR |
|
|||
|
Did u read the link?? you gotto cut a lil bit off the console!
|
|||
| Top | |
|||
| Dump3D |
|
|||
Age: 34 Posts: 100 Joined: 10th May 2008 Ride: Ford Falcon BF 2005 XR6 Location: North Dandenong |
just adding to this, any one added a EF center console to a ED, kinda stuck with how to bolt it down,kinda got a big screw atm threw the bottom, i think i may have drilled the transmission
 , but yerh getting it bolted down, and making it look half decent with the ED dash still, if thats possible, thanks boys (no girls on the internet) 
_________________
|
|||
| Top | |
|||
| peaandham |
|
|||
|
I thought cutting it was only for the air ducts ! So even if i have an AUTO if i cut it down it will fit perfectly without getting rid of the EB shifter ?
_________________ OLD CAR: EB II Falcon, Everglade Green, 250thous (Rough Guess), Wildcat Extractors, 2.5 Exhaust with Muffler + Hot Dog, 18 Inch Rodney Jane Mags, XH Snorkel, EA MPEFI Tubing ! |
|||
| Top | |
|||
| peaandham |
|
|||
|
OK i got it in ok with the Tbar situation but now my tbar is too small for the whole so what do i do about that because the Au one is mainly plastic and i think it is part of the shifter assembly so do i need to go for an EF/EL one? Are they thicker ? Oh also i just need to get the ducts done and then im sweet !
_________________ OLD CAR: EB II Falcon, Everglade Green, 250thous (Rough Guess), Wildcat Extractors, 2.5 Exhaust with Muffler + Hot Dog, 18 Inch Rodney Jane Mags, XH Snorkel, EA MPEFI Tubing ! |
|||
| Top | |
|||
| Froudey |
|
||
|
do you have access to a wreck at the wreckers? how hard would it be to get the whole tbar a** from an au and swap it for the EB one?
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| jaysway |
|
|||
|
Dump3D wrote: just adding to this, any one added a EF center console to a ED, kinda stuck with how to bolt it down,kinda got a big screw atm threw the bottom, i think i may have drilled the transmission , but yerh getting it bolted down, and making it look half decent with the ED dash still, if thats possible, thanks boys (no girls on the internet) hope this works ed and ef consoles cut and shut viewtopic.php?f=14&t=52980 |
|||
| Top | |
|||
| peaandham |
|
|||
|
Froudey wrote: do you have access to a wreck at the wreckers? how hard would it be to get the whole tbar a** from an au and swap it for the EB one? I have access to many wreckers but if i want it cheap and to get it myself i can go to Upull it but there arent Au's there, there are only EA-EL's the bottom half of the Au Tbar is plastic thats why i am confused !
_________________ OLD CAR: EB II Falcon, Everglade Green, 250thous (Rough Guess), Wildcat Extractors, 2.5 Exhaust with Muffler + Hot Dog, 18 Inch Rodney Jane Mags, XH Snorkel, EA MPEFI Tubing ! |
|||
| Top | |
|||
| B0XCAR |
|
|||
|
peaandham wrote: Froudey wrote: do you have access to a wreck at the wreckers? how hard would it be to get the whole tbar a** from an au and swap it for the EB one? I have access to many wreckers but if i want it cheap and to get it myself i can go to Upull it but there arent Au's there, there are only EA-EL's the bottom half of the Au Tbar is plastic thats why i am confused ! im gonna be puttin the whole au shifter setup in mine before i sell it so i will stell you if it can be done lol
|
|||
| Top | |
|||
| peaandham |
|
|||
|
Ok cool but the orange thing under the letters does not line up properly when shifting because of the hole that is bigger than the shifter ! What can i do about this before then?
_________________ OLD CAR: EB II Falcon, Everglade Green, 250thous (Rough Guess), Wildcat Extractors, 2.5 Exhaust with Muffler + Hot Dog, 18 Inch Rodney Jane Mags, XH Snorkel, EA MPEFI Tubing ! |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 34 guests |
