|
| Balboa |
|
||
|
Hi can anyone tell me how to remove the centre dash facia in an au need to replace some globes.
|
||
| Top | |
||
| phatba |
|
||
|
the part where the aircon dials are?
its been about 4 or 5 years since i changed one, but heres what i remember of it. remove the glove box, should be a wire going across to a white clip. open the clip, remove wire. from memory theres a few retaining screws, try removing the ash tray and little rubber mat underneath. cant recall the exact position. then prise it away from the rest of the dash, it clips into place, but dont pull to hard as there are aircon hoses connected to the fascia. |
||
| Top | |
||
| Balboa |
|
||
|
cool thanks for that
Yeah its the part where the aircon dials are. |
||
| Top | |
||
| DormanAU |
|
||
|
on my series 3 there are 2 bolts behind the headunit and then it just pulls out, just needs a good yank out.
_________________ Au factory 5sp, rolling on 20'z, full custom extractors, redback cat and back. has a new motors, only 27,000ks |
||
| Top | |
||
| sin2k8 |
|
||
|
There are 2 screws behind the ash tray, and 2 behind the top half of the headunit. It just clips out after that
|
||
| Top | |
||
| sin2k8 |
|
||
|
Tool to remove the headunit is about 10 bucks on ebay
|
||
| Top | |
||
| Balboa |
|
||
|
{USERNAME} wrote: Tool to remove the headunit is about 10 bucks on ebay I just use a thick piece of oxy welding wire bent into a u shape works a treat and is $0 from work |
||
| Top | |
||
| Falcon_92_EB |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: Tool to remove the headunit is about 10 bucks on ebay I just use a thick piece of oxy welding wire bent into a u shape works a treat and is $0 from work i used a cut and bent metal coathanger. 
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 53 guests |