hi guys, i just purchased last week a au III vct xr6 manual in blue and i want to change the dash lights on the cluster 2 blue like i did in my ef. is it an easy procces to remove the cluster? also do thy use the same globes as the ef/el?? cheers

the cluster, two screws in the top, under the cap thingys, and it should slide out after a little moving around and a little force.

yeah its only the two screw above it... and there's 2 plugs behind it... dont pull on the clear plastic... you'll break the clips... you can remove the drivers side air vent pretty easy if you cant wiggle it our... (pull the door seal off and remove the plastic bit that looks like a od semi circle then it should push out) the top of mine got tuck so i used a flat blade screwdriver to help

ok sweet, thanks. i will giv that a try. jus wondering which gloes i need 2 get to use to make the lights blue?! do th au clustrs ue the same globes as the ef/el cluster??

cheers

if the cluster does not move * more than likely as it never been out * stick 2 screw drivers in the hols and use tehm to pull the cluster out