after doing a quick search on the web about converting a 99 au ute manual window regulators to electric i couldn't find anything with pictures!!! So i thought i'll do i little write up.

first source the regulators, i bought my non genuine ford ones from ebay.

http://www.ebay.com.au/itm/170494653583 ... 1439.l2649

first take off the door trim. mine had a screw in the handle, two at the bottom and one on the side, yours may be different.


after you take of the trim panel youll see this:

i just ripped mine out because i'm going to put something else to replace it.


now the fun part, removing the window from the slider? (dunno)



after the clips are undone i lifted the window and secured it with tape.

after the window is secured undo the nuts highlighted. i started with the slider? then the three nuts securing the regulator.


after the regulator is out you can begin to put the new one in the same way you took the old out.

comparison:


bolt holes:

the black arrows are the old locations, the green are the new locations.

this is what it will look like when completed


i'm not doing a wiring section because im doing my own wiring with a couple of switches and poly-switches from jaycar.

if anyone has anything to contribute please do.

cheers,
fullyforded

Thanks for the info mate this will help me! I have a series 2 au ute and want to do the same, anyone know if you can pull out the door looms from a power window optioned au and plug it straight into the series 2 loom? Cheers