|
| 93EB |
|
|||
Age: 47 Posts: 2485 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
Guys the Ba has killed another actuator in the rear passenger door. How hard is it to replace myself as im not wanting to pay Ford another $220 to fix it, and can it be replaced with another model actuator or aftermarket actuator that has pehaps better reliability. Cheers.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| Froudey |
|
||
|
the actuator is the same from AU to BA/Terrority the only thing that the AU one has a different rod, they don't seem to be that hard to replace if your mechanically minded cause it is a simple plug in,
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| 93EB |
|
|||
Age: 47 Posts: 2485 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
so can i put an AU one in?
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| hickmanioz |
|
|||
|
dont take it to fraud it will cost you $360!
_________________ Team EGO |
|||
| Top | |
|||
| 104ord |
|
|||
|
easy as pie ive done 2 on my ba and if you find it hard to do you should not own a car.. j/k
_________________ if the bar aint bendin your just pretendin |
|||
| Top | |
|||
| nannas_ed |
|
|||
|
93EB wrote: so can i put an AU one in?
yes but no au ba and bf all use the bf door lock actuators but au and ba will need a separate wiring loom that connects the door lock to the wiring loom this is because the bf use a different plug on their locks the jumper loom is about $15 also for the record territory door locks are different again and only suit territory's
_________________
|
|||
| Top | |
|||
| GASSA |
|
||
|
i CAN SUPPLY 1 BF REAR DOOR LOCK TO YOUR DOOR 4 $140
GASSA
_________________ When the clutch drops the bull s**t stops!!!!! |
||
| Top | |
||
| Froudey |
|
||
|
nannas_ed wrote: 93EB wrote: so can i put an AU one in? yes but no au ba and bf all use the bf door lock actuators but au and ba will need a separate wiring loom that connects the door lock to the wiring loom this is because the bf use a different plug on their locks the jumper loom is about $15 also for the record territory door locks are different again and only suit territory's ya sure? i work at the wreckers in dubbo and the boss owns a terrority the left hand front acuator shat it self and we replaced it out of a BA we had to slighty bend the rod and 3 months laer nodramas
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| phatba |
|
||
|
mate there super easy to replace. im not terribly great on the spanner, and i managed to swap all four actuators in an au fairmont in about 1 to 2 hours. (that also included beer breaks)
|
||
| Top | |
||
| 93EB |
|
|||
Age: 47 Posts: 2485 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
Thanks guys for your helpful comments. I picked up an actuator from the wreckers and slipped her in for $60 bucks. It was indeed easier than i thought. My main concern on doing it was breaking the door trim clips etc but the operation went well. Im sure ill end up doing more of these actuators in the future.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 10 guests |
