|
| blue lightening87 |
|
||
|
Hi its been a while since ive been on here, and i was wondering if its possible to fit an Fg dash and interior into my Ea falcon? or can you only fit Ba-Bf?
Cheers. |
||
| Top | |
||
| Robert_au |
|
|||
|
blue lightening87 wrote: Hi its been a while since ive been on here, and i was wondering if its possible to fit an Fg dash and interior into my Ea falcon? or can you only fit Ba-Bf? Cheers. Are you talking the entire dash crash pad and electronics? I don't see why it wouldn't be possible FG dash bolted up the same if i hear correctly. Will be heaps of work cutting and shutting bits getting it to all fit But would probably look mint when its done? IF your going to go for the dash and interior might as well try the hole hog and go for engine and most of the driveline too
_________________ Current Ride |
|||
| Top | |
|||
| blue lightening87 |
|
||
|
Yer i thought it would be alot of work something for me to play with one down the track. I have already got a Ba xr6 turbo motor and gearbox in it already, which im gunna rebuild to handle 1000hp in the future. The interior just looks boring.
|
||
| Top | |
||
| Robert_au |
|
|||
|
Yeah the ea's were pretty drab, Goodluck with the build if you go ahead.
i'm actually in the planning stages of a full B series conversion myself into a EF xr6. basic plan is to hopefully run the B series suspension and K frame up front and Au live axle in rear and all the B series looms.
_________________ Current Ride |
|||
| Top | |
|||
| blue lightening87 |
|
||
|
Good luck sounds like you have a bit of work ahead of you..
|
||
| Top | |
||
| Mad2 |
|
|||
|
Robert_au wrote: Yeah the ea's were pretty drab, Goodluck with the build if you go ahead. i'm actually in the planning stages of a full B series conversion myself into a EF xr6. basic plan is to hopefully run the B series suspension and K frame up front and Au live axle in rear and all the B series looms. gooood luck with that one mate, don't mind the cluster/door trims [kinda] but draw the line at the dash  ... will not the BA/BF live axle not fit?
|
|||
| Top | |
|||
| Robert_au |
|
|||
|
Mad2 wrote: Robert_au wrote: Yeah the ea's were pretty drab, Goodluck with the build if you go ahead. i'm actually in the planning stages of a full B series conversion myself into a EF xr6. basic plan is to hopefully run the B series suspension and K frame up front and Au live axle in rear and all the B series looms. gooood luck with that one mate, don't mind the cluster/door trims [kinda] but draw the line at the dash ... will not the BA/BF live axle not fit?Thanks Mad2, I think i'm going to need it! The B series Live axle out of the wagon or ute may be made to fit with cutting and changing the mounts over as they were leaf sprung. Reasoning for thinking the AU live axle is they were a 4 link setup like the E series if i recall correctly The only thing im worried about ( after some deeper thought) is the Pips? for the abs sensors being different
_________________ Current Ride |
|||
| Top | |
|||
| Mad2 |
|
|||
|
lol ... sorry have had AU/BF wagooons on me mind for a few days now
 & yeah they may be??
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 62 guests |
