|
| stephen53 |
|
||
|
hi can any tell me is the tissue box seperate from rest of cd radio surround how deep does it go back and how hard is it to take out iam looking to put a dvd player in its place
|
||
| Top | |
||
| fordfreak ef |
|
|||
|
cant most audio installers just install the dvd player where the tissues usualy go and install a fascia around the dvd player to make it look like a factory setup..??
|
|||
| Top | |
|||
| phatba |
|
||
|
to take it out you need to remove the drivers seat, the complete centre console, the handbrake, the banana trims, and then the tissue holder.. a aftermarket head unit will fit easily in its place. some people make a fake fascia for the head unit with mdf and screw it into place, or you can buy fascias from ebay or supercheap, which you put in place of the tissue box holder and you can retain your power socket.
|
||
| Top | |
||
| fourL6 |
|
|||
|
just an idea, id like to see one installed...
{DESCRIPTION} 
_________________ Was - {DESCRIPTION} |
|||
| Top | |
|||
| fourL6 |
|
|||
|
{USERNAME} wrote: to take it out you need to remove the drivers seat, the complete centre console, the handbrake, the banana trims, and then the tissue holder.. a aftermarket head unit will fit easily in its place. some people make a fake fascia for the head unit with mdf and screw it into place, or you can buy fascias from ebay or supercheap, which you put in place of the tissue box holder and you can retain your power socket. iv never had to take a drivers seat or handbrake out of a BA...? i just undo those to banana trim things and the tissue box holder comes right out
_________________ Was - {DESCRIPTION} |
|||
| Top | |
|||
| phatba |
|
||
|
iirc to take out the tissue box, you have to,
1. remove the auto shifter surround 2. remove banana trims 3. remove centre console (to do this requires undoing the handbrake bolts which requires removing the drivers seat) the tissue box im pretty sure has 2 screws holding it into the centre console,, and the centre console needs to be moved to get it out. i could be wrong though as mine was done at the same time as changing the shifter globe, which neccesitated the console removal anyways. |
||
| Top | |
||
| Kenay |
|
|||
|
{USERNAME} wrote: iirc to take out the tissue box, you have to, 3. remove centre console (to do this requires undoing the handbrake bolts which requires removing the drivers seat) the tissue box im pretty sure has 2 screws holding it into the centre console,, and the centre console needs to be moved to get it out. i could be wrong though as mine was done at the same time as changing the shifter globe, which neccesitated the console removal anyways. lol 1. remove the auto shifter surround 2. remove banana trims 3. undo 1 screw either side of tissue box holder and out it comes |
|||
| Top | |
|||
| troy1 |
|
||||
|
hey mate takes bout 5 mins to do. just pull out cup holder auto surrond 2 screws for the banana trims then jst 2 screws holding it in. if you go to a car audio shop they should new holders for a heaad unit. i bought mine from autobarn for $100 expensive but it was metal so no chance of breaking. r u putting in a double din or fold out dvd player... the space is very tight when its in because of all the wires nd crap
|
||||
| Top | |
||||
| data_mine |
|
|||
|
{USERNAME} wrote: hey mate takes bout 5 mins to do. just pull out cup holder auto surrond 2 screws for the banana trims then jst 2 screws holding it in. if you go to a car audio shop they should new holders for a heaad unit. i bought mine from autobarn for $100 expensive but it was metal so no chance of breaking. r u putting in a double din or fold out dvd player... the space is very tight when its in because of all the wires nd crap I've got this holder too. The tissue box holder is a pop off the shifter surround, two screws for the 'bannana strips', then twos crews for the tissue box holder. Initially I modded the tissue box holder to fit a deck in. I changed to the same as troy1, as it looks better, and centres the head unit.  You can see here the where the screws go (the white discoloured screw marks) just below and to the left of the ICC. Also you can see how much room (there's not much at all) there is. Most head units (especially those with lots of RCA outputs) are a very tight fit back there.
_________________ 1998 DL LTD in Sparkling Burgundy, daily, 302W, stereo, slow |
|||
| Top | |
|||
| stephen53 |
|
||
|
thanks for all info have tissue box out also bought facia replace tissue box which includes power source and head unit just srew into this great item saves messing around now just waiting dvd unit as i have already got screen in headrests they there bought it with ratty playstation which i dump i will still probably need take centre consol out run wiring through still looks big job.
just wondering why we always have mess with cars we get lol post pics when finished |
||
| Top | |
||
| Lukeyson |
|
|||
|
Good. We want pics.
Lukeyson |
|||
| Top | |
|||
| ptbl |
|
||
|
just an idea, id like to see one installed...
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... K:MEWAX:IT I'll be installing one of these in my 05 ba xr6 mk2 this sat or in the coming week.. just need to find a dvd 7'' flip out and wait for the 6x9s and amps.. then ill start . ill post pics when im successful. |
||
| Top | |
||
| Lukeyson |
|
|||
|
"This listing (300347747436) has been removed, or this item is not available."
Lukeyson |
|||
| Top | |
|||
| ptbl |
|
||
|
Oh it's because I purchased it's the fascia with two USB connections
|
||
| Top | |
||
| XR290 |
|
||
|
Forgive my facia marks, did that getting the head unit in. But here is the head unit facia installed.
 and a night view  You will need to extend the power source cable to get it to fit. The USB is excellent for charging my mobile phone 
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 32 guests |
