|
| ef_paddy |
|
||
|
Hey guys,
Just after opinions which do you think will look better and/or be more comfortable? ba xr6 rear seats or ef fairmont ghia rear seats? Like i said before i'm not sure if i want to swap them.
_________________ "You only need 2 tools, WD-40 and duct tape. If it doesnt move and it should, use WD-40. If it moves and it shouldnt, use the duct tape!" |
||
| Top | |
||
| duvauchellemotors |
|
|||
|
O would say the BA seats in the rear 'They would match the front ones and the car would look alt tidier.
What colour trim do you have ? |
|||
| Top | |
|||
| ef_paddy |
|
||
|
[quote="frankieh"]When he says "rails" he doesn't just mean the runners at the bottom. You basically remove the seat back, and then the seat bottom and put them aside.. then do the same with the old seats and throw all the mech including the seat back include adjuster and everything aside.. then bolt the back and base onto the E series mech.. It's fiddley, but not very hard.
AU and BA are similar from a lot of perspectives.. so perhaps seating is one of them. Hey guys, well had a play with the seats... took the ef apart hoping to just swap the rails from the ef on to the ba bases only to realise that the runners are bolted on and welded to the rest of the seat mecahnicals. It's only now that i've gotten inside and read your post that it's making sense Frankieh. Looks like i'll have to have another crack at it next week. Didn't think to take pics either lol
_________________ "You only need 2 tools, WD-40 and duct tape. If it doesnt move and it should, use WD-40. If it moves and it shouldnt, use the duct tape!" |
||
| Top | |
||
| frankieh |
|
|||
|
If you can take a photo of the underside and under the plastic cover of the tilt adjuster.. I'll be able to tell you straight away if it's easily doable...
|
|||
| Top | |
|||
| fourL6 |
|
|||
|
i would quickly jump on these if i was in nsw
http://fordforums.com.au/showthread.php?t=11244350
_________________ Was - 2001 AUIII Ford Falcon Forte |
|||
| Top | |
|||
| spinner1987 |
|
||
|
im about to put bf seats in to my ef fetura soon i will take some pics as i do
it to make it easer for every one who is thinken of converting |
||
| Top | |
||
| EFFalcon |
|
|||
|
spinner1987 wrote: im about to put bf seats in to my ef fetura soon i will take some pics as i do it to make it easer for every one who is thinken of converting Haha... that makes 2 of us. Keen to see how you go about it. Are you doing front and back? Front should be pretty straight forward with modifying the brackets. backs are a b**ch.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| frankieh |
|
|||
|
Front seats won't be that hard I suspect.. but the back ones are interesting if you plan to do it properly.... they go in easy.. it's fixing them in thats fun... not hard but..... fiddley..
|
|||
| Top | |
|||
| EFFalcon |
|
|||
|
frankieh wrote: Front seats won't be that hard I suspect.. but the back ones are interesting if you plan to do it properly.... they go in easy.. it's fixing them in thats fun... not hard but..... fiddley.. the back seat backs use completely different brackets. not hard to fab up, but a lot different to AU even. and the back seat base is a lot different due to the BA floor pan being a lot flatter from the fuel tank.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| spinner1987 |
|
||
|
great sounds like fun!!!
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 38 guests |
