|
| aubrute. |
|
||
|
I've bought BA XR wanting to install them into my Au Falcon Ute, is it possible to modify the rails?
or should i just sell them? |
||
| Top | |
||
| Froudey |
|
||
|
{USERNAME} wrote: I've bought BA XR wanting to install them into my Au Falcon Ute, is it possible to modify the rails? or should i just sell them? Direct Bolt up apparently
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| Froudey |
|
||
|
{USERNAME} wrote: Nope sorry, no where near it. The angles and the dimensions are completely different. I went to do the same thing myself, had a look at both seats next to each other and decided to put the seats into another car. Didn't think it was worth the huge hassle I could see it to turn out to be. Well what have the other people have done? swapped rails?
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| aubrute. |
|
||
|
Ok thanks for your help.
Officially for sale : Pair of BA XR seats, black with the blue pattern on the insert. $350? pick-up or deliver depending where you are from. |
||
| Top | |
||
| duvauchellemotors |
|
|||
|
I herd its not that bigger job. I'v seen a few EB's done out with BA seats aparantly you swap over the rails and support brackets i dont see wky AU's woul be much different. Its fiddly but not impossible. I know ill be putting BA XR black leather seats in my EB when i get the money.
|
|||
| Top | |
|||
| aubrute. |
|
||
|
yeah i've had both the seats out together, i see how it doesn't work.
pretty upset about that. lol would you's know anyone who would install these seat in the western sydney region? |
||
| Top | |
||
| spinner1987 |
|
||
|
what colour ar they and how much
|
||
| Top | |
||
| Papa Smurf |
|
||
|
The best way I could think to install these on an AU would be to cut out that section of floor on a BA and have the AU piece replaced by that? Lot of work to go to but at least it WOULD fit.
You can buy a NEW front floor panel for $290.00 from Ford and maybe you could find a GOOD welder/Panel Beater to weld it in for you. |
||
| Top | |
||
| fpvf250 |
|
||
|
would au fairmont ghia or fairlane leather seats fit? anyone know...
|
||
| Top | |
||
| au man |
|
|||
|
{USERNAME} wrote: would au fairmont ghia or fairlane leather seats fit? anyone know... Your talking bout au falcon and puttin au fairmont ghia seats in it. IF so then yes |
|||
| Top | |
|||
| fpvf250 |
|
||
|
opps yeah i mean au sedan seats into a au ute. giving me ideas
|
||
| Top | |
||
| XR-Lane |
|
|||
|
{USERNAME} wrote: The best way I could think to install these on an AU would be to cut out that section of floor on a BA and have the AU piece replaced by that? Lot of work to go to but at least it WOULD fit. You can buy a NEW front floor panel for $290.00 from Ford and maybe you could find a GOOD welder/Panel Beater to weld it in for you. That seems to be way too much s**t to go through just for seats. I would suggest to get a boiler maker or someone with good fab skills to make up an adapter plate so the AU rails fit to the BA seats. Welding may not even be required. The bottom of the seat where the rails is flat? get some flat bar for each side and drill 2 sets of holes in to 2 pieces, 1 for both rails. then you bolt the flat bar to the to the seat and the second set of holes can be drilled to suit the AU rails. Unless im missing something here, the only thing that f**k you up is the floor pan? the rails are flat on the top and it can only be the position of the holes on the seats that stop you from doing it. |
|||
| Top | |
|||
| foggy |
|
||
|
I wish the bottom of the AU seats where flat.
Looked at this with my ute as well and really to much hassall I just put new foam in my current seats |
||
| Top | |
||
| XR-Lane |
|
|||
|
someone got a pic, shout out to ash. I want to see it now Im sure if you really wanted to you could adapt the rails to the BA seats, by means of fabrication.
|
|||
| Top | |
|||
| XR-Lane |
|
|||
|
awesome, ill check in later.
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 26 guests |
