my xr drivers seat seems to lean towards the centre seat belt pillar the gap is a lot smaller on the drivers side seat compared to the passenger seat, i think the frame or rails are slightly bent to cause the seat back to lean, you cant feel it, standing in front of the car or going to grab the seat belt you can see the difference
the seats are out of a wreck and not original to the car, i am just wondering if i could change seat frames from a xt and put the xr cushions and covers on them, as they are very easy to remove

yes they are the same frame.

The only cars that have different pads are the F6, GT/Pursuit and XR sport seat.
GT-P or Pursuit Utes have a different seat base L/H and R/H, the seat track assy is the same, only change is for 6 way seat.

thanks papa, just wanted to change my frames in the xr6 seats with ones from the xt, the xr ones seem to have a bend to them, thanks

yep totally same. simply unbolt from floor, unbolt the base, and trade over. did it to a bodgy xr base i had. be wary if there from a smash to check/change the pretensioner too