Fordmods Logo

BEM/ICC Change 

 

Page 4 of 4 [ 56 posts ] Go to page Previous  1, 2, 3, 4

 
 Post subject: Re: BEM/ICC Change
Posted: Sat Aug 04, 2018 8:46 am 
Fordmods Newbie
Offline

Posts: 2

Joined: 10th Mar 2017

Ride: BA XR6 ute

Location: Hunter Valley
NSW, Australia

Sorry to drag up an old thread/topic which is been done to death but.............I'm in a similar situation as the OP. I have an 03 BA XR6 ute with the poverty pack single zone ICC. I picked up a BF Premium ICC yesterday and after reading this thread, would I be correct in saying that if I use the BEM from my current ICC and put it into the Premium ICC it should work??? Or is there a 50/50 chance I will need to get the radio coded? At this stage I'm not worried about not having the dual climate control, temp sensor or auto headlight function working. I can frustrate myself with that later!!
Top
 Profile  
 
 
 Post subject: Re: BEM/ICC Change
Posted: Mon Sep 24, 2018 12:52 pm 
Smokin em up
Offline
User avatar

Posts: 232

Joined: 7th Nov 2006

Ride: Territory TS TDCi

Location: Melbourne
VIC, Australia

auxr6s1 wrote:
Sorry to drag up an old thread/topic which is been done to death but.............I'm in a similar situation as the OP. I have an 03 BA XR6 ute with the poverty pack single zone ICC. I picked up a BF Premium ICC yesterday and after reading this thread, would I be correct in saying that if I use the BEM from my current ICC and put it into the Premium ICC it should work??? Or is there a 50/50 chance I will need to get the radio coded? At this stage I'm not worried about not having the dual climate control, temp sensor or auto headlight function working. I can frustrate myself with that later!!


Yes you will need to get the ICC coded (unless it's unlocked). Using your original BEM will allow you to start and drive the car.
Top
 Profile  
 
 
 Post subject: Re: BEM/ICC Change
Posted: Wed Dec 26, 2018 8:00 pm 
Parts Gopher
Offline

Age: 55

Posts: 86

Joined: 3rd Mar 2006

Ride: EB GT fakey

Location: cairns
QLD, Australia

Hey all, apologies as above for bringing up an old thread, but i have a BA XR6 auto that I have the computer, ICC, and both ignition and door barrels in and am converting it to manual. I have a manual computer, ICC, barrels etc and want to know if i can swap the manual BCM into my dual zone ICC or do I need to find an up-spec ICC out of a manual? I am yet to swap my AC box over so have no AC atm and have the dash, wiring loom, rear bare (reverse sensors) out of the fairmont ghia and am hoping that swapping all this over will get me on the road again.

Any advice appreciated
Top
 Profile  
 
 
 Post subject: Re: BEM/ICC Change
Posted: Sat Mar 02, 2019 8:19 pm 
Fordmods Newbie
Offline

Age: 35

Posts: 6

Joined: 1st Mar 2019

Ride: Ford Territory

Location: Adelaide
SA, Australia

Hey guys, just wondering if anyone could give me some advice I recently. Changed from the standard ICC to the premium in my Ford territory but the screen will not work at all. The person I bought it off swears that it works and even provided photo proof.

All the controls ie aircon, radio buttons just no screen at all.

Thank you to anyone who lends a hand
Top
 Profile  
 
 
 Post subject: Re: BEM/ICC Change
Posted: Sat Mar 02, 2019 8:31 pm 
Smokin em up
Offline
User avatar

Posts: 232

Joined: 7th Nov 2006

Ride: Territory TS TDCi

Location: Melbourne
VIC, Australia

Savterritory wrote:
Hey guys, just wondering if anyone could give me some advice I recently. Changed from the standard ICC to the premium in my Ford territory but the screen will not work at all. The person I bought it off swears that it works and even provided photo proof.

All the controls ie aircon, radio buttons just no screen at all.

Thank you to anyone who lends a hand


Did you replace the complete unit, including the CD player?
Top
 Profile  
 
 
 Post subject: Re: BEM/ICC Change
Posted: Sat Mar 02, 2019 9:14 pm 
Fordmods Newbie
Offline

Age: 35

Posts: 6

Joined: 1st Mar 2019

Ride: Ford Territory

Location: Adelaide
SA, Australia

[/quote]

Did you replace the complete unit, including the CD player?[/quote]

We retained the cd player from my ICC as they were both single cd units. Will that cause an issue? Mine looked in much better condition.
Top
 Profile  
 
 
 Post subject: Re: BEM/ICC Change
Posted: Sat Mar 02, 2019 9:29 pm 
Smokin em up
Offline
User avatar

Posts: 232

Joined: 7th Nov 2006

Ride: Territory TS TDCi

Location: Melbourne
VIC, Australia

Savterritory wrote:
We retained the cd player from my ICC as they were both single cd units. Will that cause an issue? Mine looked in much better condition.


Yes, the colour mono cd players are different even though the plugs fit the same. on the underside the mono screen cd player it will say LO, colour screen will say HI.
Top
 Profile  
 
 
 Post subject: Re: BEM/ICC Change
Posted: Sun Mar 03, 2019 9:35 pm 
Fordmods Newbie
Offline

Age: 35

Posts: 6

Joined: 1st Mar 2019

Ride: Ford Territory

Location: Adelaide
SA, Australia

Your a legend just tried it and the screen now comes on but I get a Security Code error message :( what's wrong now?
Top
 Profile  
 
 
 Post subject: Re: BEM/ICC Change
Posted: Sun Mar 03, 2019 9:55 pm 
Fordmods Newbie
Offline

Age: 35

Posts: 6

Joined: 1st Mar 2019

Ride: Ford Territory

Location: Adelaide
SA, Australia

So reading the thread more thoroughly it seems I need a visit to Ford. What a shame.

The aircon isn't working either I assume that is apart of it all?

I have noticed a big black mark on the screen as well unfortunately so another issue I'll need to look into.
Top
 Profile  
 
 
 Post subject: Re: BEM/ICC Change
Posted: Sun Mar 03, 2019 10:20 pm 
Fordmods Newbie
Offline

Age: 35

Posts: 6

Joined: 1st Mar 2019

Ride: Ford Territory

Location: Adelaide
SA, Australia

So i managed to put it into test mode and all the buttons are working in reverse ie 6 is 1 etc.. I'm at a loss I think I'll put the standard one in and just leave it for now. I do really like I the idea of it though
Top
 Profile  
 
 
 Post subject: Re: BEM/ICC Change
Posted: Tue Mar 12, 2019 8:07 pm 
Fordmods Newbie
Offline

Age: 35

Posts: 6

Joined: 1st Mar 2019

Ride: Ford Territory

Location: Adelaide
SA, Australia

Just thought I would update this. Turns out the Cd Player and screen where faulty and that was the reason for my issue's.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 4 of 4  [ 56 posts ]  Go to page Previous  1, 2, 3, 4

Who is online

Users browsing this forum: No registered users and 59 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sun Nov 17, 2024 7:05 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names