|
fordnut1988 |
|
||
|
ok so i was browsing ebay as you do ..... and i found this
{DESCRIPTION} so it got me thinking this wold be pretty cool to do .....so my question is what do i need to do this mod??? |
||
Top | |
fordnut1988 |
|
||
|
|
||
Top | |
ef_falcon_95 |
|
|||
|
You'll need a t5 wedge smd blue led can be found in eBay . Take out the glass globe and replace it with the blue smd led .
Then take out the orange filter in the trip computer and put in white paper These one http://item.mobileweb.ebay.com.au/viewi ... 7717279260
_________________ El XR6 Turbo |
|||
Top | |
REW93N |
|
|||
|
Don't you have to re-solder the trip computer?
_________________ Blue blooded. |
|||
Top | |
ef_falcon_95 |
|
|||
|
Nah I never did , it has two bulb holders in the Back , same as the dash .
Put in the ones I linked up and take out the orange filter and put in white paper , or blue . Your thinking of the air con controls , it's bulbs are soldered in
_________________ El XR6 Turbo |
|||
Top | |
fordnut1988 |
|
||
|
{USERNAME} wrote: Nah I never did , it has two bulb holders in the Back , same as the dash . Put in the ones I linked up and take out the orange filter and put in white paper , or blue . Your thinking of the air con controls , it's bulbs are soldered in climate control bulbs are not soldred either if ur thinking of the climate control and i have some t5 blue led`s here so what do i do now do u have some pics of the progress at all? |
||
Top | |
ef_falcon_95 |
|
|||
|
I have no pics but it's pretty easy
_________________ El XR6 Turbo |
|||
Top | |
fordnut1988 |
|
||
|
ahh ok do u have a step by step instructions at all also how did u get ur needles on ya el cluster to light up blue i have blue t5`s but did u change ya needles at all
|
||
Top | |
ef_falcon_95 |
|
|||
|
U have to put in white ef needles or use nail polish remover to take off the orange on ya el needles .
1 remove dash 2 push trip computer out of dash , disconnect wires 3 using a flat blade screw driver , be gentle and pop the trip computer apart , 4 Then there will be screws inside , take them out to get to the filter . 5 put in paper filter 6 out in blue LEDs , u may have to twist them around a few times as they only light up one way
_________________ El XR6 Turbo |
|||
Top | |
fordnut1988 |
|
||
|
{USERNAME} wrote: U have to put in white ef needles or use nail polish remover to take off the orange on ya el needles . 1 remove dash 2 push trip computer out of dash , disconnect wires 3 using a flat blade screw driver , be gentle and pop the trip computer apart , 4 Then there will be screws inside , take them out to get to the filter . 5 put in paper filter 6 out in blue LEDs , u may have to twist them around a few times as they only light up one way what kind of paper do u use for the filter |
||
Top | |
ef_falcon_95 |
|
|||
|
A4 paper . Normal printing paper.
Or a thin piece of blue transparent plastic would be good, but paper is fine .
_________________ El XR6 Turbo |
|||
Top | |
fordnut1988 |
|
||
|
{USERNAME} wrote: A4 paper . Normal printing paper. Or a thin piece of blue transparent plastic would be good, but paper is fine . what works best as a filter as im after the best possible result |
||
Top | |
ef_falcon_95 |
|
|||
|
You will also need good LEDs .
I went back to stock lighting as I tried many LEDs and was never happy , I couldn't get the trip comp to light up properly , Search didn't light up but the others did . Get a blue filter , if you can find one , that will work best
_________________ El XR6 Turbo |
|||
Top | |
fordnut1988 |
|
||
|
{USERNAME} wrote: You will also need good LEDs . I went back to stock lighting as I tried many LEDs and was never happy , I couldn't get the trip comp to light up properly , Search didn't light up but the others did . Get a blue filter , if you can find one , that will work best ahh kk might do a bit of research first |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 17 guests |