|
mreb |
|
|||
|
im swapping the dash from a EL to my eb my eb has climate control the el dosnt if i get a climate control unit for the el dash will it work with the eb climate control system behind the dash
|
|||
Top | |
mreb |
|
|||
|
please help cant find any info on it anywhere.
|
|||
Top | |
fordzatmyplace |
|
||
|
No it won't... EB and EL CC systems are a bit different
If you want to retain the climate control you will need: EL Fairmont dash loom EL Fairmont BCM EL Fairmont Climate Control Module EL Fairmont Vacume Soleniod (Make Sure its BLUE in colour, black ones won't work) EL Fanspeed Controller You can use your existing sunload sensor, and ambient temp sensor (located at front of car) Also make sure you have the front end wiring from a Futura or above, then then your original ambient temp sensor wiring will plug straight in. (i am pretty sure, may be wrong there if theres anything else i forgot i will post here again. Hope this helps.
_________________ ^^^ What He Said
|
||
Top | |
mreb |
|
|||
|
so the heater box unit ,blendor motor are they still ok or im gunna have to change the lot fingers crossed
|
|||
Top | |
snap0964 |
|
|||
|
mreb wrote: so the heater box unit ,blendor motor are they still ok or im gunna have to change the lot fingers crossed Blend door motor will be an earlier version - same as the later ones externally, so all should be fine.
If the evaporator temp sensor (enters the heaterbox behind the glovebox)is not of the alloy tube type, that should be fine too.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 32 guests |