EF/EL has a 5 wire one all the same
AU has a 6 wire one...

When you get it there is instructions on it on how to centre the spring... I recomend following them incase it wasn't removed in the middle... There is exactly 5 turns inside it... You wind it in the direction of the arrow until it goes tight then you do need to tighten it a touch further to get it to exactly half a turn... Then turn it back exactly 2.5 turns and you'll have 2.5 turns left for the other steering direction... They are really easy to centre...

It is held to the combo switch with 3 clips which you can pop uncliped with your fingers... It has to plugs down the bottom of the column... Should take 10mins to change over... You will just need to remove the steering shrouds...

Cheers,
Tim

Thanks guys

Heading down to rye for a week so I wont be home, might check in here when I get back and talk about getting one from you guys.

Thanks for the information though, really appreciate it!

If they aint local, Id be organising the part now, that way it will be there in a week when you get back.

And listen to Timmy.


@Timmy? Have you seen my thread? auto-electrical-forum-f89/interior-lights-faint-glow-no-indicators-t125528.html

I could use the input if you have any ideas.

Sorry all good