|
| KRM87 |
|
||
|
i installed cruise controll into my el... the lights cmes on the dash.but its dont work?? anyone know how to test the module??
|
||
| Top | |
||
| phongus |
|
|||
|
Check if your brake lights are working. Check all the fuses...I remember something to do with the horn fuse stuffing up and not allowing to engage CC...but I could be way wrong. But if your brakes ain't working, check the fuse and brake switch.
phong =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| KRM87 |
|
||
|
yeah all 3 brake lights work
|
||
| Top | |
||
| phongus |
|
|||
|
Another thing...is it an actual Ford EL cruise control system, or aftermaket <---not even sure if they make them
 but just in case.If it's genuine Ford, this may be a stupid question, but when you switched it on, did you push any of the (+) or (-) buttons on the controls? If you didn't, then give it a shot. Turn it on then press the (+) or (-) button and it should kick in...(sorry not sure if you have ever used the cruise control before...I remember the first time I thought something was wrong until I got button happy) Does your horn work? Also did you test it doing above 40km/hr? it doesn't work below 40km/hr as far as I know. phong =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| Ballast |
|
|||
|
tech docs are your friend...
documents.php?d=11 troubleshooting is half way down the page - and the contents atch what is in the genuine workshop manual 
_________________ Remember kids, the more pages of crap in your build thread, the bigger your e-penis is |
|||
| Top | |
|||
| KRM87 |
|
||
|
yeah i tryed that, i done a manual conversion,still have auto computer,think thats y it aint wrking
|
||
| Top | |
||
| phongus |
|
|||
|
KRM87 wrote: yeah i tryed that, i done a manual conversion,still have auto computer,think thats y it aint wrking Nope should still work. I ran an auto ECU with a manual conversion. not sure if cruise is BEM related. phong =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| racedirector |
|
|||
Age: 63 Posts: 1584 Joined: 20th Mar 2005 Ride: EDL Fairmont Wagon/AU XR8 Ghia Location: Riverstone |
I have the same problem - installed all the bits and no workee. Will be interested in what you did if you find the problem before I do, else I will let you know.
Just to double check, did you install the switch on the brake master cylinder too? Cheers RD
_________________ =1994 ED Wagon GLi body/EL Fairmont spec with *ALL* EL running gear.= |
|||
| Top | |
|||
| KRM87 |
|
||
|
removed it from an ef i wrecked.yeah put the presure switch on there.
|
||
| Top | |
||
| clampy |
|
||
|
where abouts is this switch on the master cylinder....
_________________ EL Futura 5 speed factory:PH47FL goneeeee |
||
| Top | |
||
| rainoffire |
|
|||
|
check your clutch switch if its a manual, mine stopped working after i bent the pedal box too far, and it thought the clutch was in. I ended up just putting tape over the switch and making sure i never pushed the clutch in while on cruise control
|
|||
| Top | |
|||
| KRM87 |
|
||
|
yeah its a manual...but have auto ecu..where the clutch switch wires in it is bridged..as the autos are..
|
||
| Top | |
||
| arm79 |
|
|||
|
Did you bridge the clutch swtich connector as specified in the tech document?
An does your EL have ABS or not? |
|||
| Top | |
|||
| regency |
|
|||
|
Sounds like your EL is a GLi?
The only GLi Falcons with factory Cruise also had ABS. There weren't that many. No ABS = Cruise no work? Futura upwards all came with ABS and Cruise. I have, though, seen an EL XR6 without Cruise or trip computer (cost cutting) but I assume had ABS. |
|||
| Top | |
|||
| Happy |
|
|||
|
regency wrote: No ABS = Cruise no work? nah not correct - my EF GLi came without ABS and had factory cruise fitted.
_________________ Owning 1 of 67612 EF GLi Sedans made
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google [Bot], Google Adsense [Bot] and 71 guests |
