|
| claytonchatham |
|
||
|
The only leds I can see that match your description are not designed for the dash. Is this correct and how did you convert them?
_________________ EB II |
||
| Top | |
||
| jonathon |
|
|||
|
can anyone tell me who can do this or is it something i can do my self
_________________ Owning 1 of 84,847 ebII. |
|||
| Top | |
|||
| Big Kev |
|
|||
|
{USERNAME} wrote: can anyone tell me who can do this or is it something i can do my self
yeh easy enuff to do your self dude and even easier if ya buy the repco/narva/pre done LEDs into bulb holders so no soldering/fiddlin with resistors is involved....plenty of instructions and doco on how to do it...doesnt take all that long either...
_________________ For Sale: 25 Farad Rockford Fosgate Competition Series Carbon Cap, more to come - pm me if interested |
|||
| Top | |
|||
| EF_wanabe |
|
||
|
how many LEDs are there in the speddo from stock and are there neons in there or what somone please give details since i dont have a falon yet read the sig
|
||
| Top | |
||
| DaFunk96 |
|
||
|
Wat model led's do i need for a EF falcon
please help im after blue ones |
||
| Top | |
||
| chewie_86 |
|
|||
|
How do you fit the LEDs are they just plug and go or do you have to wire them up. I've looked at the back of the ED cluster and it looks as if the globes just plug in, I can't see how they make contact with the electrical circuit and light up.
Are the LEDs id need 194 signal/marker bulbs, will they fit straight into the bulb holders or is fiddly soldering needed? is the process the same as is shown here: {DESCRIPTION} |
|||
| Top | |
|||
| Busso |
|
|||
|
So anyone know how or if this would work on an xf ?
_________________ 84 XF Falcon S Pak, 250 crossflow (rebuilt ~5000km ago, carby model), Bored out 30 thou, Crow racing cam, extractors, yokohama 245's all the way round, chrome 12 slotters, lowered, 4spd man, open wheeler (blew my lsd...), Thumping sound system, L.E.D's everywhere |
|||
| Top | |
|||
| fiftyone |
|
|||
|
whats the lowest mcd value anyones used in their conversion? i used 1500 and sanded the tops to desperse the light a bit more and it works well but im doing another project with the dash and the mcd is between 280 and 250mcd
anyone think this will be bright enough?
_________________ ** For Sale ** {DESCRIPTION} |
|||
| Top | |
|||
| fiftyone |
|
|||
|
{USERNAME} wrote: So anyone know how or if this would work on an xf ?
yeah, but you would sort of be a guinny pig of sorts as far as i know. you'd just need to bodge a few things together to make it work
_________________ ** For Sale ** {DESCRIPTION} |
|||
| Top | |
|||
| BradensEBxr6 |
|
||
|
I converted my dash to blue LED's using the tutiorial in the Technical Documents page, its under EF/EL. Comes out looking good, fuk paying $100, this cost me around $20!
_________________ EBII XR6
|
||
| Top | |
||
| bArNsY |
|
|||
|
Braden: where did you get your leds from and what specs were they
_________________ FG G6E Turbo |
|||
| Top | |
|||
| falcon_3512003 |
|
|||
|
i agree with braden done this today cost me $20 easy as to do parts from altronics melb
_________________ now have a series 1 au starting the mods slowly |
|||
| Top | |
|||
| BradensEBxr6 |
|
||
|
All parts from Jarcar. Theres 2 types of blue LED's, a bright 1 and a really bright one. I just used the bright ones but i'd recomend using the really bright ones.
You'll also need resistors which is explained on the technical document i mentioned before and heat shrink, a bit of souldering and there you have it! You can do other colours too if you wish but they need different types of resistors.
_________________ EBII XR6
|
||
| Top | |
||
| krisisdog |
|
|||
|
I just did mine. Used Inverted LEDs, probably not a good idea. Theres a few darker parts, between 1500-2000rpm on the tacho. But it inly cost $12 for 10 leds in holders. Just pulled em out, twisted the legs n pushed em in.
|
|||
| Top | |
|||
| mole |
|
||
|
Jaycar now stock these LEDs
LED 5mm Blue 5000mcd CAT. NO. ZD0182 Emmitted colour: blue Lens colour: waterclear Wave length: 470 nm: 26 Pd W: 130nW If mA: 30 If mA (peak): 100 Min: 3.2 Vf (V) Typ: 3.5 Max: 4.0 IV Min: 3500 MCD Typ: 5000 Viewing Angle: 20 QTY 1+ $3.95 10+ $3.45 25+ $2.75 What i am asking is? Would these Leds be suitable or would they be to bright.. 
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 45 guests |
