|
| stomper |
|
|||
|
Well because i am making my interior black i needed something to finish off the doors. Because im a tight a** i decided to try something different.
I got my door handles. Pulled the pin out of them and started sanding the handle part of the assembly. I used 260 grit wet n dry. I got the whole surface smooth as possible. I used a can of septone chrome. Its about 12-17 $ a can. There are better brands such as VHT but i get asked for ID where the VHT stuff is. I did one thin coat of chrome on the handle after sanding and drying it. I will do another coat when its time to. Ill get some pictures up soon (camera battery is f**k) and show you. I did one as a tester before i go stuffing up the whole lot of them. This could proove to be a cheap and effective mod for less then $20.
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| davro_xr6 |
|
||
Age: 44 Posts: 184 Joined: 11th Jul 2006 Ride: BA XR8 Sedan or a potato gun Location: Yeppoon/Rockhampton Central QLD |
Let us know how you get along with this - my bro has an ef and would be up for this mod if it works well!!
_________________ Sadly "X-RATED" has been sold to my brother - no longer do I own my XT - but its a brief sadness!! I now have an XR8 and permanent boner - SCHWING!! |
||
| Top | |
||
| Mr_Soul |
|
|||
|
you won't be able to spray and leave it... you will chip and scratch the s**t out of it... put a clear coat on after... well that is what i would do anyway
|
|||
| Top | |
|||
| daggy082 |
|
|||
|
And maybe u should have use a Plastic primer aswell... then another coat and a clear coat maybe 4 extra protection being its a thing that will be touched alot...
_________________
|
|||
| Top | |
|||
| jet ute |
|
||
|
stomper wrote: Well because i am making my interior black i needed something to finish off the doors. Because im a tight a** i decided to try something different. does the chrome look like the da real thing or da u tell the difference?
I got my door handles. Pulled the pin out of them and started sanding the handle part of the assembly. I used 260 grit wet n dry. I got the whole surface smooth as possible. I used a can of septone chrome. Its about 12-17 $ a can. There are better brands such as VHT but i get asked for ID where the VHT stuff is. I did one thin coat of chrome on the handle after sanding and drying it. I will do another coat when its time to. Ill get some pictures up soon (camera battery is f**k) and show you. I did one as a tester before i go stuffing up the whole lot of them. This could proove to be a cheap and effective mod for less then $20.
_________________ Super Pursuit |
||
| Top | |
||
| fordzatmyplace |
|
||
|
jet ute wrote: stomper wrote: Well because i am making my interior black i needed something to finish off the doors. Because im a tight a** i decided to try something different. does the chrome look like the da real thing or da u tell the difference?I got my door handles. Pulled the pin out of them and started sanding the handle part of the assembly. I used 260 grit wet n dry. I got the whole surface smooth as possible. I used a can of septone chrome. Its about 12-17 $ a can. There are better brands such as VHT but i get asked for ID where the VHT stuff is. I did one thin coat of chrome on the handle after sanding and drying it. I will do another coat when its time to. Ill get some pictures up soon (camera battery is f**k) and show you. I did one as a tester before i go stuffing up the whole lot of them. This could proove to be a cheap and effective mod for less then $20. i can tell you it will never look as good as originals
_________________ ^^^ What He Said
|
||
| Top | |
||
| smoke_ |
|
|||
|
it sure won't but why not get silver and go for the ba look?
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
| Top | |
|||
| MilleniumFalcon |
|
|||
|
sorry to get off topic. Reckon a BA door trim will fit easily enough onto an EF/EL?
Cant wait to see the pics Stomper. Always wondered how to DIY chrome plastic bits. |
|||
| Top | |
|||
| GlennBA |
|
|||
|
MilleniumFalcon wrote: sorry to get off topic. Reckon a BA door trim will fit easily enough onto an EF/EL?
Cant wait to see the pics Stomper. Always wondered how to DIY chrome plastic bits. Why would anyone want a ba door trim , they're rock hard plastic that scratches and they are so tacky. The e series door trims are better.. |
|||
| Top | |
|||
| smoke_ |
|
|||
|
GlennAUII wrote: MilleniumFalcon wrote: sorry to get off topic. Reckon a BA door trim will fit easily enough onto an EF/EL? Cant wait to see the pics Stomper. Always wondered how to DIY chrome plastic bits. Why would anyone want a ba door trim , they're rock hard plastic that scratches and they are so tacky. The e series door trims are better.. agreed, they have cushion/padding unlike the ba's trim.
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
| Top | |
|||
| twirqurky |
|
||
|
Be interested to see hte pics cua I have considered something similair as well.
You cna get them properly chromed as well cant you? |
||
| Top | |
||
| ambrose |
|
||
|
why don't you send it off for Plastic chroming?
|
||
| Top | |
||
| twirqurky |
|
||
|
ambrose wrote: why don't you send it off for Plastic chroming?
Who does that? |
||
| Top | |
||
| ambrose |
|
||
|
i know super roo in west aus does it
|
||
| Top | |
||
| mr_sperm1 |
|
|||||
|
or don't be a a*** and buy some chromies and then do this to them
_________________ Maloo - Holden's word for ugly. |
|||||
| Top | |
|||||
| Who is online |
|---|
Users browsing this forum: No registered users and 69 guests |
12.06@120MPH
