|
| Krytox |
|
|||
|
Just wondering if aftermarket electric regs are any better than factory.
I've just seen a picture of one and Im not too convinced, should I stick to fact or get the afters? cheers
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| Ugly Igley |
|
|||
|
AFAIK the aftermarket ones are prone to not fitting correctly and in some cases sratching the glass...
Having said that though, me thinks uglybob has an aftermarket one in his car at the moment, and thus far has not had issues. Personally I would stick to the genuine ones. That way you know they fit right and are suited for the job. *Flips two cents into the arena*
_________________ Proud owner of one of very few BF SR manual (June 06 build) |
|||
| Top | |
|||
| Gaz |
|
||
|
speaking of which. my drivers side window.. when u put it up, it will get half way and slow down then stop, you have to grab the window near the front of the door and lift it up, which i tihnk makes it slot back into the runners at the rear of the door..
common issue? easy fix? i had a look one day but couldnt figure much in the way of how to solve it
_________________ 2007 Steel BF Ghia MKII V8 - 19" GTP's + Superlows |
||
| Top | |
||
| Laximah |
|
|||
|
i bought some from FTG the other day (after market ones), am putting them in the car this thursday..
so i'll let you know how they go!!! Rod
_________________
|
|||
| Top | |
|||
| fordzatmyplace |
|
||
|
{USERNAME} wrote: speaking of which. my drivers side window.. when u put it up, it will get half way and slow down then stop, you have to grab the window near the front of the door and lift it up, which i tihnk makes it slot back into the runners at the rear of the door..
common issue? easy fix? i had a look one day but couldnt figure much in the way of how to solve it would you beleive i have the exact same problem on the drivers side rear door... 
_________________ ^^^ What He Said
|
||
| Top | |
||
| dazza2924 |
|
|||
|
I used to have probs with the electric windows going up in my car, but what i did was use some lube stuff and put it on the rails, electric windows work like a treat now
|
|||
| Top | |
|||
| Ugly Igley |
|
|||
|
{USERNAME} wrote: speaking of which. my drivers side window.. when u put it up, it will get half way and slow down then stop, you have to grab the window near the front of the door and lift it up, which i tihnk makes it slot back into the runners at the rear of the door..
common issue? easy fix? i had a look one day but couldnt figure much in the way of how to solve it Spray Silicon Spray in the guides and run the window up and down., if that doesnt fix it then chances are the metal windoew guide is bent. I had this problem, so I fixed it by swapping the window guide with one from a manual one. I think I posted some pics about it a while ago. Will try and find them.
_________________ Proud owner of one of very few BF SR manual (June 06 build) |
|||
| Top | |
|||
| Ugly Igley |
|
|||
|
Hey Gaz check out the pics about half way down the page....
http://www.fordmods.com/phpBB2/viewtopi ... s&start=20
_________________ Proud owner of one of very few BF SR manual (June 06 build) |
|||
| Top | |
|||
| Gaz |
|
||
|
awesome, thanks ugly..
it definatly isnt a sticky problem, if you look at the window towards the back of the door when it gets stuck you can see the window is outside the frame
_________________ 2007 Steel BF Ghia MKII V8 - 19" GTP's + Superlows |
||
| Top | |
||
| kezz |
|
||
|
put one in on sat i bought from FTG. it moves a bit slower than the other windows, maybe i didnt lube it enough, but the fact that it goes up and down is good enough for me. its good value for $100 plus postage and 3 months warranty, considering local wreckers were asking $150 + for second hand regulators
_________________ Kezz's 5sp Box Car ---> RPD enhanced with a bunch of other stuff |
||
| Top | |
||
| dvyvan |
|
||
|
Look up a company called "SPAL" they do aftermarket power window kits and they are top stuff. I helped a mate put some in his como and now ive got a set ordered for my XH
_________________ Automatics only come in assult riffles
|
||
| Top | |
||
| Gaz |
|
|||||
|
heres some photos of what happens to my window when i try wind it up
1 is what happens, and the other is what it looks liek after i pull it back into place
_________________ 2007 Steel BF Ghia MKII V8 - 19" GTP's + Superlows |
|||||
| Top | |
|||||
| Nicko |
|
|||
|
yeah the guide will be bent
The aftermarket ones are pretty good there was a couple of types but now they only use the good ones
_________________ Nicko |
|||
| Top | |
|||
| snap0964 |
|
|||
|
What you can do is remove the door trim, lower the window, unbolt the window lower mount from the p/window slide assy (2 bolts), and physically lift the window with both hands as far as you can go (lifting it from under), and see if the rubber seals are jamming the window.
If not, you may only need to adjust the lower mounting bolts(2) - looks like your window front is a bit lower, causing it to jam in the channels. You may need to elongate the mounting holes on the p/window slide to give you enough adjustment - it will be easier to remove the p/window assy to do this so you don't damage the plastic slider. Try raising/lowering the window with the two mounting bolts handtight as well. It's a pain in the a***, but I've found this way is a better long term fix.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| dazzat |
|
||
|
Just come to the wreckers with me on saturday andrew and ill try and put whatever i can in my pocket
_________________ Love getting ripped off by fellow Ford Modders... 4 to date so far since 2005!!!!
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 57 guests |
