|
ef2xr6 |
|
||
|
ok so i read the tech doco on the climate control and i read what the E2 code means, then it says to enter control mode, the only problem is that i don't know how to this, the tech doco says:
To enter Monitor Mode (EF/EL/AU Models) -Turn the Ignition switch to the "On" Position -Press the “MODEâ€, “A/Câ€, and “AUTO†Buttons together -Release the “MODEâ€, “A/C†Buttons together and the “AUTO†Button Last. what is “MODEâ€, “A/Câ€, and “AUTOâ€, i know the first one is mode and the last is auto. but what is the middle one. also i dont really know much about this stuff so any help on what to do would be much apprieciated. oh yeah my car is a ef xr6 with the climate control conversion thanks |
||
Top | |
GeZza200 |
|
||
|
It looks like to me
-Turn the Ignition switch to the "On" Position -Press the (MODE), (A/C), and (AUTO) Buttons together -Release the (MODE), (A/C) Buttons together and the (AUTO) Button Last. A/C being air conditioner
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
Top | |
ef2xr6 |
|
||
|
oh yeah, i can see that now thanks
|
||
Top | |
ef2xr6 |
|
||
|
ok i just did the check thing and it says the the tempreature blend door is at 99.5% opening, does anyone know what this means and how to fix it
|
||
Top | |
alfy |
|
|||
|
i just tried that on mine, it dosent work
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
Top | |
ef2xr6 |
|
||
|
alfy wrote: i just tried that on mine, it dosent work when i did it, it didnt look like it worked but then press the fan speed button and the big numbers will change |
||
Top | |
LP_ |
|
||
|
ef2xr6 wrote: ok i just did the check thing and it says the the tempreature blend door is at 99.5% opening, does anyone know what this means and how to fix it Not quite sure on the 99.5% part as it is only an 0.05% to 100% it is working so should be fine The fix will require the dash to be pulled back or removed as the blend door motor is mounted on top of the heater box and it may require the heater box to be removed so loss of coolant and A/C gas is required. The A/C will need to be done by an A/C specialist. |
||
Top | |
alfy |
|
|||
|
ef2xr6 wrote: ok i just did the check thing and it says the the tempreature blend door is at 99.5% opening, does anyone know what this means and how to fix it well, seeing as you have E2 on your diagnostic, and the blend door is 99.5% open, that suggests that your blend door motor has given up the ghost. as the other guy mentioned, the dash has to come out to get to it. sending 12v direct through the blend door motor can sometimes zap it back to life, but its best to replace it.
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
Top | |
ef2xr6 |
|
||
|
alright cool thanks for your help guys, ill replace it and see if that fixes the problem
|
||
Top | |
lethal EA |
|
|||
|
Can you get blend door motors new? When people replace them is it with second hand ones?
_________________ Black ED Ghia |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 33 guests |