|
| alfy |
|
|||
|
i bought myself some 6 inch speakers for the ED the other day, only to find out after pulling the door trim off the LHF door, that the door is from an EA/EB1 (4 inch speaker)
obviously its been in a prang before we bought it and had a different door put on... so can i just cut/grind out the speaker hole for the 6in speakre to fit? or is it a no-no? cheers fellas
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| kwaussiekid |
|
||
|
Just drill out the 4 rivets holding the box in place ,and then fit your 6" speakers in the same position.I did it to my EB1,originally4". Try to angle them towards the opposite seat headrest,with a bit of mdf,for better transmission of sound.
_________________ The older I get the better I was! |
||
| Top | |
||
| alfy |
|
|||
|
ahk cool cheers for that buddy.
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| xfman1986 |
|
||
|
kwaussiekid wrote: Just drill out the 4 rivets holding the box in place ,and then fit your 6" speakers in the same position.I did it to my EB1,originally4". Try to angle them towards the opposite seat headrest,with a bit of mdf,for better transmission of sound.
cheers that post helped me with a drama im having atm |
||
| Top | |
||
| kwaussiekid |
|
||
|
I also fitted extra speakers in the foot well cut-out of the door card while I was at it, so that when I get the new h/u I can wire them to the amp and have a very good front stage.
_________________ The older I get the better I was! |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 60 guests |
