|
| thediko |
|
||
|
Hi guys, tried the SEARCH feature but didn't offer much help.
I want to add an ignition switch and starter button to my ED Fairmont. Would I go about doing this by just adding an on/off switch between the ignition wire? Or is it a little more complicated than that? And how would I set up a momentary switch for the starter? Also does anyone have a wire colour diagram?
_________________ Racing an import is like competing in the special olympics.....even if you do win, you're still retarded. |
||
| Top | |
||
| 67RCE |
|
||
|
easy dodgy way, pull out starter relay, plug 2 wires in, run to push switch (similar to the fuel door/boot release switch) hard way, tap into ignition wiring off ignition barrel, then run wiring...
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| Disco Frank |
|
|||
|
67RCE wrote: easy dodgy way, pull out starter relay, plug 2 wires in, run to push switch (similar to the fuel door/boot release switch) hard way, tap into ignition wiring off ignition barrel, then run wiring...
errr NO get a relay and a push button switch ( momentary on ) hook the relay up to the starter wire coming from the ign barrel to get power for realy use a +12ve source when ign on only this way u can either start the car with the ign or the button
_________________ RIP SCOTT |
|||
| Top | |
|||
| SpeedyED |
|
|||
|
I'm now thinking about doing something like this too, except I'll be stealing the starter button from a brand new jaguar
 they are a push start button too, all I have to do now is figure out the security 
_________________ Pre AU Adapters for sale |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 68 guests |
