|
| richie |
|
||
|
Just servicing son-in-law's EF Futura.
After ignition off & key removed for a short while - doors lock themselves. Is this normal for these things or do I go looking for gremlins? Richie.
_________________ 1993 ED F/mont 5.0L, Auto, Edelbrock RPM's, CompCam XE276HR, Crane Gold Race 1.7's, Edelbrock Performer, 75mm T/B, MAP, 42lb , GenIII coils, PH4000's , Twin 2.5", Thermos & underspeeds, 3.7 LSD, 2800 stall and MoTec M800, 372fwhp @ 5400rpm & 387 ft-lb @ 4400 rpm. |
||
| Top | |
||
| fiend |
|
|||
|
It's normal. Is set to lock itself in certain circumstances (ie - you pull the key out and shut the door and don't do anything to the car for a few minutes.
I had to smash a window to get back in mine as I was late for work one day. Have heard of some cars starting to lock themselves within seconds - which results in many fustrating minutes spent breaking back in to your own car. 
I think the mid series BEM (Futura) is particularly good like that. Just be thankful that they didn't wire in a "windows up" command at the same time - leave the window down a bit and you'll never get locked out. The high series BEM I had didn't do this, but had been opened and d**k with to have an aftermarket alarm and all...' http://www.fordmods.com/forums/documents.php?doc=6 |
|||
| Top | |
|||
| richie |
|
||
|
Thanx for that.
Richie
_________________ 1993 ED F/mont 5.0L, Auto, Edelbrock RPM's, CompCam XE276HR, Crane Gold Race 1.7's, Edelbrock Performer, 75mm T/B, MAP, 42lb , GenIII coils, PH4000's , Twin 2.5", Thermos & underspeeds, 3.7 LSD, 2800 stall and MoTec M800, 372fwhp @ 5400rpm & 387 ft-lb @ 4400 rpm. |
||
| Top | |
||
| fiend |
|
|||
|
No worries - Just checked the High Series BEM I put into the Futurlane and found it does try to lock the car after 2 minutes...
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 50 guests |
