|
| Mad2 |
|
|||
|
Hi All,
with the EF/EL door cards being two piece, how do you fremove the metal clips that holds it together? wanting to replace a damaged top section & missing clips. have another set i can remove clips from.  Cheers |
|||
| Top | |
|||
| Mad2 |
|
|||
|
i do not want to damage the trim pieces.
|
|||
| Top | |
|||
| snap0964 |
|
|||
|
Just lever those clips off with a flatblade. Hot airgun the speaker grille mounts, also there's a big assed rivet around there somewhere too IIRC.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Mad2 |
|
|||
|
{USERNAME} wrote: Just lever those clips off with a flatblade. that easy?? will watch for the rivet. Thanks |
|||
| Top | |
|||
| snap0964 |
|
|||
|
The rivet is the hardest bit. I think it is one of the speaker grille fastenings.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Mad2 |
|
|||
|
{USERNAME} wrote: The rivet is the hardest bit. I think it is one of the speaker grille fastenings. yeah i saw what ya mean  .. ended up repairing original after i pulled it apart. the small clips were easy to get off & the larger were a pain. trims broke/split where it flexed on all four
|
|||
| Top | |
|||
| snap0964 |
|
|||
|
Done a few passenger side ones like in the pic - the speaker grille usually goes brittle over time (drivers doesn't), and replacing the upper section with the EL snipper delete. I think from memory I dremel that rivet off.
Just as well they aren't BA/BF ones - everything's heat welded together. 
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Mad2 |
|
|||
|
i ended up using a small flat screwdriver to break the edges off the speaker studs/clips. then used soldering iron to 'melt' some more onto/into speaker studs/clips. i made the mistake of doing the bottom speaker ones not the top.
yeah .. have a BF drivers to repair re handle...................
|
|||
| Top | |
|||
| snap0964 |
|
|||
|
With a bit of practice you can plastic weld with a soldering iron.
Gunna need it with the BA/BF door trims.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Mad2 |
|
|||
|
{USERNAME} wrote: With a bit of practice you can plastic weld with a soldering iron. Gunna need it with the BA/BF door trims. yeah  and then somehow reinforce em........ 
|
|||
| Top | |
|||
| Robert_au |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: With a bit of practice you can plastic weld with a soldering iron. Gunna need it with the BA/BF door trims. yeah and then somehow reinforce em........ i have fiberglassed the door handle things back on from the inside of the trim, kinda messy but cant see it. recommenced taping up all the cracks to the outside of the trim where possible to avoid drips down that face that leak through
_________________ Current Ride |
|||
| Top | |
|||
| Mad2 |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: With a bit of practice you can plastic weld with a soldering iron. Gunna need it with the BA/BF door trims. yeah and then somehow reinforce em........ i have fiberglassed the door handle things back on from the inside of the trim, kinda messy but cant see it. recommenced taping up all the cracks to the outside of the trim where possible to avoid drips down that face that leak through lol ... pulled the door trim of the drivers door on the white BF .... someone had used some sort of glue/bonding agent to try & keep the top section of the armrest/handle solid mounted!. yeah all the outer trims will be coming off & replaced with ones prob off one of the EL's ? .. the 'foam' in the doglegs has to be removed so i can see what damage there is there. hopefully not to much ohh .. does anyone know what the 'nuts' for the EF/EL fairmonts etc are called, if still available? how were they fitted or did you use something else???. have to mod my EB doors & will be using the EL doors as a template. Cheers 
|
|||
| Top | |
|||
| snap0964 |
|
|||
|
Those aluminium scrivets for the armrest mounts?
They need a special crimper - very hard to crimp otherwise. They can get loose over time, making it hard to remove the mounting screw, as they start to rotate too. IIRC I used plastic trim inserts, like the inside door handle mount. There are ones with a square base, file out the sheetmetal to suit, press in. And they never rotate with the screw 
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Mad2 |
|
|||
|
{USERNAME} wrote: Those aluminium scrivets for the armrest mounts? They need a special crimper - very hard to crimp otherwise. They can get loose over time, making it hard to remove the mounting screw, as they start to rotate too. IIRC I used plastic trim inserts, like the inside door handle mount. There are ones with a square base, file out the sheetmetal to suit, press in. And they never rotate with the screw that's a bloody brilliant idea snapl! .. that i will be doing instead Thanks very much for that.
|
|||
| Top | |
|||
| snap0964 |
|
|||
|
The scrivets are covered here: ford-technical-document-power-window-conversion-d21 down the bottom.
If the plastic insert is a snug fit(not super tight), the screw will expand it when done up.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 10 guests |
