|
| EL2XR8 |
|
|||
|
Hi guys, I picked up a peice like this for an ELXR and I can't get it to fit, know this is on ebay out of an EFXR?
Can anyone confirm wether it should fit or not? Thanks. http://cgi.ebay.com.au/ford-falcon-ef-e ... dZViewItem
_________________ EL II XR8
|
|||
| Top | |
|||
| MacGyver |
|
|||
|
Ok. My last EF was a series 2 and the surround was held in by 1 press clip and one screw. On my current series one with the hidden lighter there is no press clip just two screws. That is probably your problem. Trying to press that clip into a screw hole. Unscrew the male press clip in the dash and use two screws instead.
cheers Scott
_________________ If it doesn't fit, jam it. If that doesn't work use a hammer. - Engineers Motto |
|||
| Top | |
|||
| lukey |
|
|||
|
I'm pretty sure they'll all fit as long as its EF/EL. Where exactly isn't it fitting in? You got get the little metal bit behind the cig lighter to slot in, might have to use a bit of force.
|
|||
| Top | |
|||
| MacGyver |
|
|||
|
Pretty sure series one and two are different. As I said above my series two used one screw, my series one uses two.
cheers Scott
_________________ If it doesn't fit, jam it. If that doesn't work use a hammer. - Engineers Motto |
|||
| Top | |
|||
| fordzatmyplace |
|
||
|
MacGyver wrote: Pretty sure series one and two are different. As I said above my series two used one screw, my series one uses two.
cheers Scott your right, if you look at the pic, that one has two screw holes making it harder to fit to a later model then fitting the newer style to a older car
_________________ ^^^ What He Said
|
||
| Top | |
||
| EL2XR8 |
|
|||
|
lukey wrote: I'm pretty sure they'll all fit as long as its EF/EL. Where exactly isn't it fitting in? You got get the little metal bit behind the cig lighter to slot in, might have to use a bit of force.
basically behind the cig. lighter.
_________________ EL II XR8
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 22 guests |
