Little Johnny has failed again! This time I got a code 63 on the Airbag light, which is an Intermittant or Repaired Memory Clear Circuit Failure, so I asked little Johnny for a solution but he wouldn't answer. I think there is a fault on the page.

I read that I should be able to reset the highest priority fault by connecting the pin to chassis, but that didn't work either.

Does anyone else know what it means and how to get rid of it.

The Duck (love the rain)

So I pulled the airbags fuse and waited a few minutes and now I have a code 52, which is an intermittent low battery alarm. I don't appear to be able to get rid of these by the usual method.

Any ideas?

Duck

undo the pos batury turnable leave it for about 5 mins put turnable back on and try to recode it again

Well, I did it. I took out the fuse marked "airbags" for a few minutes and then went through the code clearing process.

The system went through the 52 and then the 63 giving a series of beeps each time and now I have no alarms at all.

Thanks

Duck