|
| EF 5.0 |
|
||
|
can this be done? is it plug and play?
the EL Fairmont cluster is out of a 6 cylinder car! does this matter? also the EL cluster has a sticker on it that says police 96da 10849 ba vdo 12673 does this mean anything? 
|
||
| Top | |
||
| TerroristGHIA |
|
|||
|
Police cluster, is plug and play. 6 or 8 doesnt matter for the EF/EL
You will need to change the sender for the Oil from a switch to a sender, bout 80 bucks from fraud. Sender is located in front of the oil filter next to the water pump. Need a 1 1/16 deep socket to replace Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| SLO247 |
|
||
|
Regarding the Oil pressure sender, doesn't the EF Fairmont already have the correct one too? They also had the mid level cluster.
|
||
| Top | |
||
| Krytox |
|
|||
|
Cluster is a direct fit, and Yes, the tacho will work with a 6 or 8.
You'll need to remove the LCD dimming resistor from the police cluster for it to operate in a fairmont (as they have variable dimming) police spec had the hi/lo toggle *reason for resistor* read: http://www.fordmods.com/forums/Changing ... s-d14.html
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| OZBMX |
|
|||
|
is the cluster actually out of an el Fairmont, if it is and is working in it, it'll be a straight plug and play. Otherwise normally copspec clusters were only in mid and low spec cars, which meant they needed a resistor added for dimming function etc. may have already ben done or something though, can always plug it in and give it a try.
check tech docs with regards to further info on the dimming function and that resistor etc.
_________________ Signature removed by moderator.signature must not exceed 120x500 pixles |
|||
| Top | |
|||
| EF 5.0 |
|
||
|
OZBMX wrote: is the cluster actually out of an el Fairmont, if it is and is working in it, it'll be a straight plug and play. Otherwise normally copspec clusters were only in mid and low spec cars, which meant they needed a resistor added for dimming function etc. may have already ben done or something though, can always plug it in and give it a try.
check tech docs with regards to further info on the dimming function and that resistor etc. it was from a fairmont wagon el from the wreckers (upullit)! |
||
| Top | |
||
| OZBMX |
|
|||
|
ok, well I'd throw it in and see as it should be fine.
_________________ Signature removed by moderator.signature must not exceed 120x500 pixles |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 51 guests |
