|
| adamBRUV |
|
||||
|
hey guys, converting my NL Fairlane Ghia Concorde to manual, im missing a pin on the clutch pedal that the clutch cable end attaches too, can anyone help tell me what its called or where i can get one from ? trying ford tomorrow, any other help would be great!
thanks (note pin is where arrow is pointing)
|
||||
| Top | |
||||
| phongus |
|
|||
|
Grab a Mal Wood pedal pin.
http://www.malwoodauto.com.au/innovations.htm If you're in a hurry, unfortunately you won't get it sooner unless you can find someone who wants to get rid of their Mal Wood pin. The conversion didn't come with the manual pedal box? Considering you have ripped out the pedal box...I would have thought you'd replace it with the manual box. Mal Wood pin can be fitted without removal of pedal box.
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| adamBRUV |
|
||
|
yea the conversion did come with the manual pedal box, the pedal box is in the car now but i only just noticed the pin was missing once i tried to fit the clutch cable to the pedal. do you think ford would sell the pin im pointing to in the picture?
|
||
| Top | |
||
| TimmyA |
|
|||||
|
Phong is talking about the pin the clutch pedal hinges off...
Are you sure this is right? I thought that pin was welded part of the pedal... I doubt Ford will have one too... Cheers, Tim
_________________ {DESCRIPTION} |
|||||
| Top | |
|||||
| phongus |
|
|||
|
{USERNAME} wrote: yea the conversion did come with the manual pedal box, the pedal box is in the car now but i only just noticed the pin was missing once i tried to fit the clutch cable to the pedal. do you think ford would sell the pin im pointing to in the picture? Ohhhh my bad  I don't think Ford would have it. As Timmy said...it should be welded on 
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| adamBRUV |
|
||
|
hmmm wierd!! its just a clean hole, doesn't feel like something has been welded there before ... ill take the clutch pedal off tomorrow and take it the the steel yard, see if i can get a piece same size welded in and just drill a hole in the end. my best bet.
|
||
| Top | |
||
| phongus |
|
|||
|
{USERNAME} wrote: hmmm wierd!! its just a clean hole, doesn't feel like something has been welded there before ... ill take the clutch pedal off tomorrow and take it the the steel yard, see if i can get a piece same size welded in and just drill a hole in the end. my best bet. You need the proper size diameter so that the bushes sit properly. I'm sure someone on here might know the diameter of the rod/pin...if all fails, take the clevis and bushes with you.
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| adamBRUV |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: hmmm wierd!! its just a clean hole, doesn't feel like something has been welded there before ... ill take the clutch pedal off tomorrow and take it the the steel yard, see if i can get a piece same size welded in and just drill a hole in the end. my best bet. .if all fails, take the clevis and bushes with you. was already going to 
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 17 guests |
