|
| dahayes |
|
||
|
Hi,
Just need some assistance... i want to wire up electric windows with 2 switches, one for each side (its a ute). I want to use BA switches mounted in the centre console.I know there is a thread on this already but I struggle with most wiring jobs and couldnt make much sence of it. laymens terms would be great... Cheers Dan |
||
| Top | |
||
| fourL6 |
|
|||
|
this might help... its form my ba dash conversion thread...
fourL6 wrote: this is what i have figured out so far... if anyone has any more info it would be greatly appreciated...  and this is how i have connected the passenger switch  fourL6 wrote: Wiring Up Rear Power Windows Without Windows or Door + Looms might also do this for the front passenger
BA Single Switch 1-2 3-X X-4 5-X 1 = Power Supply From Front 4 Window "Lock" Switch 2 = To 4 Window Switch "Up" (Depending on what window your wiring up) 3 = To Motor Reg + (Red) 4 = To Motor Reg - (Blue) 5 = To 4 Window Switch "Up" (Depending on what window your wiring up) I've Tested This on the Back Left Window but with 1 Connected To a Acc. Wire and 2+5 Earthed... I'm Assuming When the 4 Window Switch Isnt in Use it will just act as a earth...? My windows arn't working very well so im of to buy some silicon spray  ... i hope thats all it needs and that the speaker wire im using is thick enough...Cheers Cam
_________________ Was - 2001 AUIII Ford Falcon Forte |
|||
| Top | |
|||
| rtb307 |
|
||
|
hit here guys look i have a ba 2002 xr6 ute now the problem im having is that my left hand window wont go up when i use the drivers side switch but it will go down....just not up....
but when i use the passsenger side switch it goes up and down perfectly???? can any of you guys help me out please as to what is goin wrong?? and yes iv made sure that they are all plugged in properly and are not loose ok |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 27 guests |
