I've had a bit of a problem with my ED over the last few months. I would assume I have a short in the hazard light wiring because when I have the fuse for the hazard lights in it destroys the flasher unit thus leaving me with no indicators so to overcome this problem I have resorted to removing the hazard light fuse in order to have my indicators working - Not really a problem as we seldom use hazard lights anyway.
Prior to the above mentioned problem I noticed that the indicators stopped flashing each time you locked/unlocked the doors via the remote. Could that be a possible Smartlock problem?
Thanks in advance for any advice.
Cheers

The smartlock might be using the hazards flasher can to turn on the indicator flash ergo put the fuse back in the indicator /smartlock flash will work.Does this make sense.So fuse in = smartlock does it's thing and the can dies.Hope this helps.Kevman.