|
| Lucion |
|
||
|
Hi Guys
Its a EF GLi I have been having some problems with winding my drives side window up and down ( its a hand winder one )..It moves side to side in the runner and gets stuck  I even brought a new winder assembly for it but its still the same.I have brought some spray and that works ok for a about 1 min..than it get stuck again. I have also tried to adjust the tracks them selves but that dose not help much I would not worrie to much but its going for a roadworthy soon. Has anyone got any ideas on how I could fix this Thanks Lucion |
||
| Top | |
||
| hans hartman |
|
||
|
{USERNAME} wrote: Hi Guys Its a EF GLi I have been having some problems with winding my drives side window up and down ( its a hand winder one )..It moves side to side in the runner and gets stuck I even brought a new winder assembly for it but its still the same.I have brought some spray and that works ok for a about 1 min..than it get stuck again. I have also tried to adjust the tracks them selves but that dose not help much I would not worrie to much but its going for a roadworthy soon. Has anyone got any ideas on how I could fix this Thanks Lucion the rubbers could be worn out or full of dirt,i read you can slot the holes for more adjustment.sounds like its binding on the edge of the glass.
_________________ R.I.P HANS HARTMAN |
||
| Top | |
||
| Lucion |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: Hi Guys Its a EF GLi I have been having some problems with winding my drives side window up and down ( its a hand winder one )..It moves side to side in the runner and gets stuck I even brought a new winder assembly for it but its still the same.I have brought some spray and that works ok for a about 1 min..than it get stuck again. I have also tried to adjust the tracks them selves but that dose not help much I would not worrie to much but its going for a roadworthy soon. Has anyone got any ideas on how I could fix this Thanks Lucion the rubbers could be worn out or full of dirt,i read you can slot the holes for more adjustment.sounds like its binding on the edge of the glass. yes that's whats its doing...the tracks are not bolted in there they are spot welded i heard some graphite would help...but I have no idea what they meant by that weather its a powder or in a stick..or what ever and i don't have any idea where you would get it. I wonder if you can buy new ones...well its driving me nuts I know it wont pass a roadworthy like it si 
|
||
| Top | |
||
| hans hartman |
|
||
|
find another door and ease or pry the rubber out off the channels,remove the class first,the whole rubber comes out,wash the track grooves with a tooth brush of similar to remove dirt ,mould and built up crap,when its dry use the micro fine graphite powder,small puffer type bottle about a 50mls size,it does wash out with time.clean your glass edges and rub some on before you put the glass back in.
_________________ R.I.P HANS HARTMAN |
||
| Top | |
||
| Lucion |
|
||
|
micro fine graphite powder,small puffer type bottle about a 50mls size <---- Where would you go to buy that ?
and thanks for your help so far Lucion |
||
| Top | |
||
| hans hartman |
|
||
|
{USERNAME} wrote: micro fine graphite powder,small puffer type bottle about a 50mls size <---- Where would you go to buy that ? and thanks for your help so far Lucion any parts shop should sell it,ring a few up in your area,industrial suppliers.
_________________ R.I.P HANS HARTMAN |
||
| Top | |
||
| Lucion |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: micro fine graphite powder,small puffer type bottle about a 50mls size <---- Where would you go to buy that ? and thanks for your help so far Lucion any parts shop should sell it,ring a few up in your area,industrial suppliers. ok I will give it a try..I live in a small country town..it sucks sometimes...so a place like repco be a place to try ? |
||
| Top | |
||
| hans hartman |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: micro fine graphite powder,small puffer type bottle about a 50mls size <---- Where would you go to buy that ? and thanks for your help so far Lucion any parts shop should sell it,ring a few up in your area,industrial suppliers. ok I will give it a try..I live in a small country town..it sucks sometimes...so a place like repco be a place to try ? yes,thats why i said ring around,in a small town they may have some or you can order it in over nite
_________________ R.I.P HANS HARTMAN |
||
| Top | |
||
| Lucion |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: micro fine graphite powder,small puffer type bottle about a 50mls size <---- Where would you go to buy that ? and thanks for your help so far Lucion any parts shop should sell it,ring a few up in your area,industrial suppliers. ok I will give it a try..I live in a small country town..it sucks sometimes...so a place like repco be a place to try ? yes,thats why i said ring around,in a small town they may have some or you can order it in over nite Thanks so much for your help Hans 
|
||
| Top | |
||
| hans hartman |
|
||
|
i haave a similar problem here,10 suppliers with limited stock,but can get it over nite or a few days,if i drive the car it takes all day to see them,if i ring my favourites-10 minutes away,i get it done,the impossible takes a week.be carefull a little goes along way,it spreads when rubbed in.
_________________ R.I.P HANS HARTMAN |
||
| Top | |
||
| Lucion |
|
||
|
{USERNAME} wrote: i haave a similar problem here,10 suppliers with limited stock,but can get it over nite or a few days,if i drive the car it takes all day to see them,if i ring my favourites-10 minutes away,i get it done,the impossible takes a week.be carefull a little goes along way,it spreads when rubbed in. oh well thats good to know I wont need that much then. I well pick some up next week. I am getting some new tyes for the wheels I have so I will get it then this is my build thread if your interested {DESCRIPTION} |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 19 guests |