|
| tsopanos |
|
||
|
Hello,
Has anyone here attempted to pull the fan out to clean it?? Mine seems to be blowing very weak. Is it a difficult job? regards |
||
| Top | |
||
| fordzatmyplace |
|
||
|
{USERNAME} wrote: Hello,
Has anyone here attempted to pull the fan out to clean it?? Mine seems to be blowing very weak. Is it a difficult job? regards say hello to taking your dash board out  . Cleaning it won't make it blow any faster. Chances are you'll have to put a new one in. I suggest you do this anyway so you won't have to replace it again in a few years. I have done it, so if there is anything you need to know, ask away
_________________ ^^^ What He Said
|
||
| Top | |
||
| tsopanos |
|
||
|
Thanks for the prompt reply
Any photos of the job..or helpful hints? I'm good at breaking things! Where did you get the new fan from? regards Greg |
||
| Top | |
||
| fordzatmyplace |
|
||
|
{USERNAME} wrote: Thanks for the prompt reply
Any photos of the job..or helpful hints? I'm good at breaking things! Where did you get the new fan from? regards Greg My heater fan was just a 2nd handy. No photos of the job either. But its not hard. The heater fan is located behind this thing: 
The only way to get that vent off is to pull the dash out. Another tip: once you get that vent off, the fan wheel is clamped to the fan motor VERY tight. The ONLY way to get the fan wheel off is to break it off  . So i bought a new fan wheel new from ford ($20)
_________________ ^^^ What He Said
|
||
| Top | |
||
| tsopanos |
|
||
|
Thanks for the info...
I'll give it a go on the weekend. What exactly is the part you broke off?? Should I buy one before I start the job?? |
||
| Top | |
||
| fordzatmyplace |
|
||
|
{USERNAME} wrote: Thanks for the info...
I'll give it a go on the weekend. What exactly is the part you broke off?? Should I buy one before I start the job?? Its the actual fan (not the motor) there are two parts to it. Its a big wheel looking thing. It looks similar to this: 
but thats off a chrysler. But it looks the same. Definatly buy the fan wheel first then you won't have to wait until monday to buy it off ford if your going to do it on the weekend. If you get your stuff together first it should just be a weekend job
_________________ ^^^ What He Said
|
||
| Top | |
||
| tsopanos |
|
||
|
Sounds easy enough!
When I give it a go...I'll post back on here as a new topic asking for your advice incase I screw it up! thanks again Greg |
||
| Top | |
||
| fordzatmyplace |
|
||
|
heaps of people have done dash in/out jobs so yeah, just ask and good luck!!
_________________ ^^^ What He Said
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 16 guests |