Fordmods Logo

Help Needed ASAP for Central Locking 

 

Page 1 of 1 [ 3 posts ] 

 
 Post subject: Help Needed ASAP for Central Locking
Posted: Mon Jan 11, 2010 7:57 pm 
Stock as a Rock
Offline

Age: 41

Posts: 197

Joined: 28th Dec 2009

Gallery: 5 images

Ride: EF- Wagon

Location: Toowoomba
QLD, Australia

Hey guys,

my car goes in tomorrow to have its RWC completed however the central locking has been playing up- i have purchased 2 motors however looking and fiddling around i have no idea how to remove the existing ones. Can someone please help me- this is for an ef wagon. From what i can work out the passenger side one is the one not staying down. drivers side seems fine.
Top
 Profile  
 
 
 Post subject: Re: Help Needed ASAP for Central Locking
Posted: Mon Jan 11, 2010 10:15 pm 
Smokin em up
Offline

Posts: 258

Joined: 30th Dec 2007

Location: cairns
QLD, Australia

I am assuming the ef-el are similar.So undo every screw you can find on the sides and bottom of the door trim,window winder handle and the 3 pieces of plastic that hide the screws in the [1 in the door opener and the [2 in the armrest.Now carefully starting at the bottom pull the door trim outwards .Do the boottpom and the sides .The top lifts straight up hopefully but remove the corner plastic first near the mirror.Done that ?Good ,you can slip the door handle through the hole.ok so far so good.Now you can see foam cushion stuff,pull it away from the lock end of the door and tape it out of the road.Down in the bottom corner you will see 2 rivets,grind or drill them out.These hold the actuator in place.Follow the wiring to the connector and disconnect at the other end of the door.There is a stiff wire which joins the actuator to the lock,bend it and remove the actuator and undo the 2 screws which holds the actuator to the bracket.Fit new actuator to the bracket and do everything in reverse.Have fun Kevman
Top
 Profile  
 
 
 Post subject: Re: Help Needed ASAP for Central Locking
Posted: Tue Jan 12, 2010 10:09 am 
Stock as a Rock
Offline

Age: 41

Posts: 197

Joined: 28th Dec 2009

Gallery: 5 images

Ride: EF- Wagon

Location: Toowoomba
QLD, Australia

Thanks for that man, I ended up getting it done after talking with kelv_05ef_wagon. The look of the Rivets is what threw me- i was looking for like a 10mm set of bolts. I even tried looking for bolt heads on the inside of the door. Just a bit of inexperience. Basically both front doors were rat s**t as well as the tail-gate. I have replaced the front doors and just disconnected the tailgate for now.
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 3 posts ] 

Who is online

Users browsing this forum: No registered users and 38 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Tue Dec 24, 2024 2:34 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names