|
madrose |
|
||
|
hi there not sure I have put this in the right place sorry
anyway I have found that I cant open the tail on my el wagon anymore it is unlocked but the handle to open the tailgate dosent do anything is there a way of opening it from inside or do I p[ush it off a cliff ??? thanks in advance for any help |
||
Top | |
Rick's EF Fairmont Wagon |
|
||
|
you may have to bust it open.
give it good bash with your hand while pressing the remote. the lock is hard to get at from inside
_________________ BF3 Egas XT Wagon |
||
Top | |
snap0964 |
|
|||
|
Take off the rear no plate, remove the recessed bolt behind it.
From the inside, pull/pry the plastic strip along the base of the rear tailgate window, you may be able to pull the whole panel area off the lip that holds it on. You should now be able to flex the panel to get to and remove the 4 bolts that hold the rear no plate surround to the tailgate back. You'll now be able to access the lock assy - the pull rod has probably slipped out of it's hole.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
Top | |
sunbury23 |
|
|||
Age: 35 Posts: 354 Joined: 11th Dec 2007 Ride: ED Futura Classic & EF Futura SW Location: Scummers |
i have a similar prob. when it is unlocked and ya pull the handle it wont open. i found out that ya need to have ya fingers right on the tip of the handle and then give the handle a bit of a yank.
|
|||
Top | |
madrose |
|
||
|
got it open
a screwdriver on the locking mech popped it open fround that the bracket holding the handle had bent slightly and wasent letting it open the lock rebent the bracket and it all works like new again I thought fords where built tough just not the brackets holding the handles in place have also found that the tailgait has started to crack in two places will have to have that fixed |
||
Top | |
Rick's EF Fairmont Wagon |
|
||
|
My Tailgate's have taken a beating with no major probs
_________________ BF3 Egas XT Wagon |
||
Top | |
madrose |
|
||
|
the tailgate is solid it's the this sheetmetal bracket holding the handle
and a couple of cracks nothing major |
||
Top | |
Ben_Daui |
|
|||
|
Thats a pain to remove the assembly, I had to replace the actuator on a EL wagon & god FORD didnt make enough room to just unbolt & remove.
_________________ MEMBER 1390 |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 80 guests |