|
| KRUPTD |
|
||
|
Cansome please point me in the right direction or help me i have sagging hoodlining in my ed sedan,how to fix???Pull the hood lining section down and spray 3m adhesive and then just stick the lining back to the egg carton???cheers
_________________ COMING SOON,XD WITH A TURBO...CLEVO STYLE |
||
| Top | |
||
| PIMP_LTD |
|
||
|
Is it the lining sagged of the whole cardboard thing too?
If its only the lining, i have fixed this by pulli9ng it down, spraying it with septone spray adhesive, then carefully lay it back up there. If its the backing too, your f**k.
_________________ Commodore australia's favorite car??? What a load of s**t |
||
| Top | |
||
| grub73 |
|
|||
|
Go to your local Motor trimmer, they would see about two of these things a month, Holden, Ford, Range Rover, Saab, All of this type of headlining will go eventually. I normally charge about $275 for most large sedans $320 for wagons and that is doing it properly, removing the headlining from the car, clean down the board, and apply new material with a spray grade contact adhesive from a spray gun not a can,( I havn't found any spray can ones that I'm happy with
 )
_________________ EF XR6 5spd 14.57@97mph |
|||
| Top | |
|||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
about 50 golden thumb tacks will do the job
i placed mine in even rows..... looks very pimp LOL!!! |
||
| Top | |
||
| PIMP_LTD |
|
||
|
FordFairmont wrote: about 50 golden thumb tacks will do the job
i placed mine in even rows..... looks very pimp LOL!!! LOL, thats whats holding mine up in the EB. I can spell out naughty words in it *giggles like a 10th grader*
_________________ Commodore australia's favorite car??? What a load of s**t |
||
| Top | |
||
| frankieh |
|
|||
|
Takes an hour to replace one entirely, and about 40 to 50 bucks to pick up a good EL one...
just did it myself.. easy as. |
|||
| Top | |
|||
| KRUPTD |
|
||
|
Thanks for the help guys,but REALLY thumbtacks...I'm just going to pull down the lining and re adhease it.Will see how i go.cheers
_________________ COMING SOON,XD WITH A TURBO...CLEVO STYLE |
||
| Top | |
||
| Gli_TurboGTP |
|
|||
|
Theres a tech document around somewhere that tells you how to do it.But I can't seem to find it.
_________________ I have not failed.I've just found 10,000 ways that won't work - Thomas Edison |
|||
| Top | |
|||
| frankieh |
|
|||
|
re-adhering will look less than satisfactory..
seriously, I tried that before I just paid the 50 bucks and bought an EL one.. looks great and no sag.. took 1 hour or so to change. rgds Frank |
|||
| Top | |
|||
| hot-04l |
|
||
|
i paid 30 bucks for a mint el one and it only took 25 mins to change it over
|
||
| Top | |
||
| grub73 |
|
|||
|
Re gluing won't last, if I was in your position, I would at least clean down the board and use new material.
_________________ EF XR6 5spd 14.57@97mph |
|||
| Top | |
|||
| cArSiK |
|
||
|
my brother glued his with the spray adhesive - wored fine
|
||
| Top | |
||
| Luxo Sprint |
|
|||
|
my mate pulled his down and replaced with a ford racing bed cover looks ace and very bling
|
|||
| Top | |
|||
| frankieh |
|
|||
|
you should get a photo of that Mr TickFordEFXR6
|
|||
| Top | |
|||
| hans hartman |
|
||
|
all car over 10 years old do it,the foam backing breaks down,ita glued to the material and the foam is glued to the card board.remove the lot.remove the foam-leave the glue,but a new cloth cover and glue it on,or get the guy to glue it neatly,then re install it,dyi-strech and smooth it out neatly and small sections at a time.
_________________ R.I.P HANS HARTMAN |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 55 guests |
