|
| kyleat1 |
|
||
|
how do u program a keypad for a el wagon as the manual says to use the boot switch but there is no switch
|
||
| Top | |
||
| Krytox |
|
|||
|
Turn Ignition on, press the demister button 3 times within 5 seconds.
The door locks will cycle once. Wait 2-3 seconds, Press 'any' button on the working remote fob The doors cycle again. Wait 2-3 seconds and Press 'any' button on the NEXT remote... The doors cycle again. You can do this to a total of 4 remotes, and all existing remotes are deleted. You would have found this if you searched.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| kyleat1 |
|
||
|
i tried search and could not find it and i tried the demister button and it dont work any other ideas
|
||
| Top | |
||
| Aussierox |
|
||
Age: 32 Posts: 65 Joined: 29th Jan 2012 Ride: 1997 Falcon EL Fairmont Wagon Location: Melbourne |
I am having exactly the same problem, I've tried doing the steps exactly as described many many times but pressing the demister button 3 times (on,off,on) never puts the car into learn mode, the locks never cycle.
|
||
| Top | |
||
| Esteven8 |
|
|||
|
Ignition must be on and ALL accessories turned OFF.
Press demister button 3 times only i.e. press 1 = demister on, press 2 = off, press 3 = on again. If the door locks don't cycle, turn the ignition off and start the process over again.
_________________ dc_todd wrote: Cheap pads squeal like cheap hookers, and you can take that to the bank. Au Fairmont Ghia My (Old) 95 EF Wagon |
|||
| Top | |
|||
| Aussierox |
|
||
Age: 32 Posts: 65 Joined: 29th Jan 2012 Ride: 1997 Falcon EL Fairmont Wagon Location: Melbourne |
Esteven8 wrote: Ignition must be on and ALL accessories turned OFF. Press demister button 3 times only i.e. press 1 = demister on, press 2 = off, press 3 = on again. If the door locks don't cycle, turn the ignition off and start the process over again. That's exactly what I've been doing but still no luck. The strange thing is, It never worked when we bought the car 3 years ago and I recently installed a sound system and tried the smartlock again for the hell of it and it worked, for about 10 minutes and then stopped working again. I'm assuming the only reason it started working again was because I disconnected and re connected the battery. I'm guessing it's a fault with the BEM unit? |
||
| Top | |
||
| TheELghia |
|
|||
|
hey mate.
Iv done this before and it took me a couple of shots before it eventually did the cycle. I think its because you have to press the demister button at a certain speed before the BEM reealises whats happening. Do it too slow or fast and it will completely ignore it. Well that worked for me anyway. Give it a shot! |
|||
| Top | |
|||
| Aussierox |
|
||
Age: 32 Posts: 65 Joined: 29th Jan 2012 Ride: 1997 Falcon EL Fairmont Wagon Location: Melbourne |
TheELghia wrote: hey mate. Iv done this before and it took me a couple of shots before it eventually did the cycle. I think its because you have to press the demister button at a certain speed before the BEM reealises whats happening. Do it too slow or fast and it will completely ignore it. Well that worked for me anyway. Give it a shot! I've tried all sorts of different speeds over the last few days and still no luck  thanks for the tip though mate.
|
||
| Top | |
||
| Darkz2012 |
|
||
|
Heya how ya going took me abit just make sure when you press the demister button that the light comes on the front dash, my switch waz abit sticky and wouldnt turn on at first felt like it was working but the light wasnt coming on. Do that 3 times On, Off, On with the doors closed in Acc and nothing running ie Radio, Cigarette-Chargers ect... Good Luck Also I did it pretty slow and make sure ya battery in ya remote iz good
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 25 guests |
