|
| twr7cx |
|
|||
|
The tech doc ( documents.php?d=25 ) doesn't say how to.
Do I have to unsolder the LCD off the board in order to change the colour filter for the LCD screen on an EF/L climate control module? |
|||
| Top | |
|||
| Mickus |
|
|||
|
Ive had a look at it myself and the only way I could devise to do it was to unsolder the screen, however some guy on here reckons you dont have to but I never opened it up again to take a look. Im keen to know if theres another way though!
_________________ "We will rise from chaos to elude this damnation, Hail horror, hail infernal world, better to reign in hell than serve in heaven" |
|||
| Top | |
|||
| OZBMX |
|
|||
|
yeah I don't believe It'll be possible due to the way it's setup without desoldering, that's what I ended up doing.
_________________ Signature removed by moderator.signature must not exceed 120x500 pixles |
|||
| Top | |
|||
| Ballast |
|
|||
|
It has to be unsoldered to get the initial filter out. If you replace the filter with paper or plastic, and further down the track wish to change the colour of the filter, it will be easier to remove the filter that you have fitted.
Thank god the previous owner took care of the CC LCD on mine 
_________________ Remember kids, the more pages of crap in your build thread, the bigger your e-penis is |
|||
| Top | |
|||
| twr7cx |
|
|||
|
I've been looking at it thinking about cutting the plastic off at one side, but that's dodgey. I guess I'll have to go and buy a solder sucker tomorrow and remove the LCD.
|
|||
| Top | |
|||
| XR-Lane |
|
|||
|
I did this to a spare one not so long ago mate. The only way to do it is to de solder it.
|
|||
| Top | |
|||
| Mickus |
|
|||
|
Whats the easiest way to desolder it without damaging the board? I havnt had much experience, will a regular soldering iron do the trick?
_________________ "We will rise from chaos to elude this damnation, Hail horror, hail infernal world, better to reign in hell than serve in heaven" |
|||
| Top | |
|||
| XR-Lane |
|
|||
|
EBFAN666 wrote: Whats the easiest way to desolder it without damaging the board? I havnt had much experience, will a regular soldering iron do the trick? You need de solder tape. You place the tape over the solder you want to remove and push the soldering iron on top of that. the solder then draws into the de solder tape. Its really quite easy. |
|||
| Top | |
|||
| snap0964 |
|
|||
|
This will work better if you flux the braid - be careful, don't leave it on too long, repeated attempts may lift tracks.
Being Americanised as we are, you'll most likely see the braid advertised as "Sodderwick"(Solderwick). If you don't have a vacuum removal tool, probably better to get a TV repair shop to remove it for you.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| the_scotsman |
|
|||
|
I desoldered mine, to make it blue light my other LCDs...but I just couldn't get it to look good. It's orange no matter what....so I even removed the orange coloured backing from the LCD (it peeled off easily)....but then it just doesn't work because the lights in the back just shine through everywhre, not just the segments.
if anyone has successfully managed to get the CC LCD blue, I'd love to know what method they used, a in material used etc... |
|||
| Top | |
|||
| twr7cx |
|
|||
|
the_scotsman wrote: if anyone has successfully managed to get the CC LCD blue, I'd love to know what method they used, a in material used etc... I havn't done my CC LCD yet. However, after just doing my trip computer and instrument cluster. I used PostIt paper in blue, found it was showing up a greenish blue, so I changed the globes from behind the LCDs to blue LEDs and now I have nice bright blue LCDs (I sanded the top of the LEDs to prevent the spot light effect). |
|||
| Top | |
|||
| the_scotsman |
|
|||
|
Yea...I have all my LCDs blue except the CC...I used white paper and blue LEDs...
|
|||
| Top | |
|||
| V8 Ghia Mike |
|
||
|
Has anyone converted the displays to plain white?
Mike
_________________ EF Ghia 5.0 - XR8 in a tuxedo....classy, low and loud |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 65 guests |
