Fordmods Logo

How to turn off interior lights when the door is open. 

 

Page 2 of 2 [ 29 posts ] Go to page Previous  1, 2

 
Posted: Sun Jun 01, 2008 6:53 pm 
Technical Contributor
Offline
User avatar

Age: 60

Posts: 5659

Joined: 14th Jan 2005

Gallery: 10 images

Ride: 96 XH/97 EL

Location: South Coast
NSW, Australia

frankieh wrote:
yeah, but would that do the footwell lights and stuff?
No. but if they are LED's the power drain will be very small. I thought the main concern were the overhead lights.

frankieh wrote:
I figured that if there was a single point (the headlight switch) to turn them all on together.. then there should likewise be a way to turn them all off together.
The headlight switch acts like another courtesy light switch. With your setup, the -ve line of the lights is connected to the central controller, footwells. steer column, all 4 door switches, then runs the RHS of the vehicle, then upwards on the RHS of the rear parcel shelf. So it has a fair distance, but does meander around.
To turn lights on, very easy, earth anywhere along that line - to turn them off, you need to break the line at a common point for all lights, unfortunately, not that easy.

The EF/EL setup, all door switches connect to one line, which goes to the BEM, so you put your switch in that area, as previously mentioned, so this one is very easy.

Be interesting to see how this is dealt with in pre EF police vehicles.

 

_________________

96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl
97 EL Futura S/W: LPG, Alarm, LED int Lts, Trip Comp, F/Lane Dome Lt, Climate Ctrl, T5 Conversion

Top
 Profile  
 
 
Posted: Sun Jun 01, 2008 10:58 pm 
Getting Side Ways
Offline
User avatar

Age: 52

Posts: 3424

Joined: 23rd Dec 2007

Gallery: 32 images

Ride: BA XR6T (mix of BA, BF and FG)

Location: Perth
WA, Australia

If there is a fuse in the panel for all interior lights.. I could just branch in behind that....
Top
 Profile  
 
 
Posted: Sun Jun 01, 2008 11:11 pm 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 1997

Joined: 31st Dec 2007

Gallery: 9 images

Ride: xc wag's, tnklane wag's

Location: Munruben
QLD, Australia

Well as snap said.
snap0964 wrote:
Try pulling the CRT LP fuse when you start work.

 

_________________

Signature removed by moderator.signature must not exceed 120x500 pixles

Top
 Profile  
 
 
Posted: Sun Jun 01, 2008 11:57 pm 
Tyre Shredder
Offline
User avatar

Posts: 396

Joined: 22nd Aug 2006

Ride: ED Fairmont Ghia, XH Outback, EF

Location: Gnangara, Perth
WA, Australia

If pulling the CRT LP fuse works, couldn't you just put a switch in from the fuseblock?

Short of that, it'd be a f**k, but wire it straight into the four door sensors that are part of the body?

 

_________________

Image

Top
 Profile  
 
 
Posted: Mon Jun 02, 2008 12:10 am 
Getting Side Ways
Offline
User avatar

Age: 40

Posts: 581

Joined: 5th Mar 2007

Gallery: 13 images

Ride: EF Fairmont AU Falcon FG XR6

Location: Eastern Suburbs,VIC
VIC, Australia

just put in a switch in after the fuse within the fuse box itself

some cutting and joining but nothing to hard

 

_________________

My Fairmont

Top
 Profile  
 
 
Posted: Mon Jun 02, 2008 12:24 am 
Technical Contributor
Offline
User avatar

Age: 60

Posts: 5659

Joined: 14th Jan 2005

Gallery: 10 images

Ride: 96 XH/97 EL

Location: South Coast
NSW, Australia

The only problem with the CRT LP fuse is that you might lose the clock settings and/or stereo settings - test it and see. I'm assuming you used the existing power for the overhead unit - so this will lose any settings (if any) as well.
IMO fitting a switch is a waste of time - you can just undo the 2 phillips heads for each door switch, pull them and let them hang.
You don't need to have all 4 doors open, do you ???

 

_________________

96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl
97 EL Futura S/W: LPG, Alarm, LED int Lts, Trip Comp, F/Lane Dome Lt, Climate Ctrl, T5 Conversion

Top
 Profile  
 
 
Posted: Mon Jun 02, 2008 2:09 am 
Getting Side Ways
Offline
User avatar

Age: 52

Posts: 3424

Joined: 23rd Dec 2007

Gallery: 32 images

Ride: BA XR6T (mix of BA, BF and FG)

Location: Perth
WA, Australia

yes, but is that fuse only for the interior lights?
Top
 Profile  
 
 
Posted: Mon Jun 02, 2008 6:46 am 
Getting Side Ways
Offline
User avatar

Age: 34

Posts: 1997

Joined: 31st Dec 2007

Gallery: 9 images

Ride: xc wag's, tnklane wag's

Location: Munruben
QLD, Australia

I believe it does the radio and interior lights, in smartlock cars it, also will prevent you starting, but you've got an ea which is pre smartlock isn't it?
The other option is just maybe set a littlle alarm, and turn it over for a couple miutes every half hourr or so to charge it.
Guess it all depends what your doing.

 

_________________

Signature removed by moderator.signature must not exceed 120x500 pixles

Top
 Profile  
 
 
Posted: Mon Jun 02, 2008 12:31 pm 
Getting Side Ways
Offline
User avatar

Age: 52

Posts: 3424

Joined: 23rd Dec 2007

Gallery: 32 images

Ride: BA XR6T (mix of BA, BF and FG)

Location: Perth
WA, Australia

ok, if it's smartlock and radio, I might be able to use it... I can get accessories and continious from elsewhere and I don't have smartlock.. well, my ECU does, but it's bypassed.

then i can put a switch in..
Top
 Profile  
 
 
Posted: Mon Jun 02, 2008 12:37 pm 
Getting Side Ways
Offline

Posts: 6113

Joined: 8th May 2007

frankieh wrote:
The falcons are the only car I've ever found where you couldn't turn them off.


not all falcons

in my mont, the lights turn off after 30 seconds
Top
 Profile  
 
 
Posted: Tue Jun 03, 2008 11:02 pm 
Fordmods Newbie
Offline

Age: 48

Posts: 17

Joined: 15th Oct 2006

Gallery: 1 images

Ride: ED V8 wagon

Location: melbourne
VIC, Australia

have you tried to take off the A pillar trim I,d say drivers side and see if the wires that up to the interior lights are there and get a test light to see which 1 sets it off with the doors open

 

_________________

Harden the F*&^ up

Top
 Profile  
 
 
Posted: Tue Jun 03, 2008 11:44 pm 
Getting Side Ways
Offline
User avatar

Age: 52

Posts: 3424

Joined: 23rd Dec 2007

Gallery: 32 images

Ride: BA XR6T (mix of BA, BF and FG)

Location: Perth
WA, Australia

Hi bldnut01

yes, that would likely work, however it would not turn off the footwell lights or the one on the back of the console.

rgds

Frank
Top
 Profile  
 
 
 Post subject: Re: How to turn off interior lights when the door is open.
Posted: Sun Jun 19, 2011 1:51 am 
Getting Side Ways
Offline
User avatar

Age: 52

Posts: 3424

Joined: 23rd Dec 2007

Gallery: 32 images

Ride: BA XR6T (mix of BA, BF and FG)

Location: Perth
WA, Australia

I never did explain why I wanted this..

I got lucky in the back of the EA a long time ago...

I was way too big to close the back doors.. so with my legs sticking out the door and the dozen or so ghia lights on.. my a** was lit up like a xmas tree... trying to go at it while keeping your toe on the door switch doesn't work either. :-)
Top
 Profile  
 
 
 Post subject: Re: How to turn off interior lights when the door is open.
Posted: Sun Jun 19, 2011 8:35 am 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 3399

Joined: 10th Jan 2010

Gallery: 8 images

Ride: EL XR6

Location: albion park, wollongong
NSW, Australia

Disconnect the battery lol

 

_________________

El XR6 Turbo
Dark Agents,Sunroof, bilstein shocks, 6000k HIDS, 329 mm slotted rotors, twin pot calipers , Climate Control, GarrettT04 turbo,log manifold, crow turbo cam, microtech lt10c, 42lb injectors , 044, surge tank , T56 , rebuilt bottom end , alloy plenum .

Aiming for 300 rwkw

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 2 of 2  [ 29 posts ]  Go to page Previous  1, 2

Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sun Nov 17, 2024 11:18 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names