|
| jrloz |
|
||
|
thepistonhead wrote: My cig lighter is now not functional in its regular spot, only in the glovebox. Thats why i asked if he could solder lol |
||
| Top | |
||
| thepistonhead |
|
|||
|
jrloz wrote: thepistonhead wrote: My cig lighter is now not functional in its regular spot, only in the glovebox. Thats why i asked if he could solder lol I didn't solder, no need for it. I try and keep my modifications as easily dissembled as possible.
_________________
|
|||
| Top | |
|||
| jrloz |
|
||
|
thepistonhead wrote: I didn't solder, no need for it. I try and keep my modifications as easily dissembled as possible. I try and keep my modifications as clean as possible  .
|
||
| Top | |
||
| jman87 |
|
||
|
Alrite thanks guys, only thing I wasnt sure of was about the wires to tap into. Yep I can solder n that, guess ill go start puttin em. Cheers for the help fellas
|
||
| Top | |
||
| jman87 |
|
||
|
Any suggestions as to where to put em up the front? I've got em at the back, under the 2 front seats, but finding a good mounting spot in the front footwells where the tubes arent visible is proving a bit tough
|
||
| Top | |
||
| krisisdog |
|
|||
|
I'll reply to your PM here. My neons are mounted directly behind the glovebox, you can feel a lip where you can stick it. Drivers side is on the steering column.
Also I would have tapped into the courtesy (door) lighting rather than acc. |
|||
| Top | |
|||
| thepistonhead |
|
|||
|
Passengers, zip tie it to under the glove box.
Driver side drill a couple of holes in the plastic and zip tie it through those. You may need a rod of wood or some dowel depending on how long your neon is (if shorter than the the gap between steering column)
_________________
|
|||
| Top | |
|||
| gasdea |
|
|||
|
run them through the parker circuit so they turn on with the head lights rather that running a seperate switch
_________________ CHECK THIS s**t: LAWLZ |
|||
| Top | |
|||
| jman87 |
|
||
|
Alrite thanks guys, I'll have a play around tomorrow with those ideas.
I've already wired them in with seperate switches, tapping into the cig lighter...I wanted seperate switches so it works well for me 
|
||
| Top | |
||
| krisisdog |
|
|||
|
gasdea wrote: run them through the parker circuit so they turn on with the head lights rather that running a seperate switch Gay idea |
|||
| Top | |
|||
| ausedwagon |
|
|||
|
krisisdog wrote: gasdea wrote: run them through the parker circuit so they turn on with the head lights rather that running a seperate switch Gay idea +1
_________________ 94 White ED Wagon |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 82 guests |
