|
| ChickenFeet |
|
||
|
While trying to install a trip computer into my EF Falcon, everything lights up but the odometre and dials no longer work?
And the trip computer doesn't work also. Any Suggestions? |
||
| Top | |
||
| Krytox |
|
|||
|
Sure you connected the data line to the right spot? remember the plug needs to upside down to locate pin order.
Check all fuses, including the ones in the engine bay. Double your handywork, and then replace the fuse if you find a blown one.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| ChickenFeet |
|
||
|
yeah the data line plug is fine and all the fuses are fine.
could it be that the wire for the data is not good enough? and i couldnt find a wire for the LCD dimmer signal? |
||
| Top | |
||
| Krytox |
|
|||
|
is the plug in securely?
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| ChickenFeet |
|
||
|
yeah and it is in far enough to make contact.
|
||
| Top | |
||
| ausedwagon |
|
|||
|
is there a fuse in the cluster at all?
_________________ 94 White ED Wagon |
|||
| Top | |
|||
| Krytox |
|
|||
|
does your cig lighter /demister lights etc light up?
Did you cut any brown wires?
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| ChickenFeet |
|
||
|
yeah i cut the brown wire going to the demister to connect to the demister and the park lamp wire together. but the demister light still works.
and their is no power going thought the yellow and black wire anymore?? |
||
| Top | |
||
| ausedwagon |
|
|||
|
if there is no power where the was power ide say u have blown a fuse. check them with a multi meter not just look at them
_________________ 94 White ED Wagon |
|||
| Top | |
|||
| ChickenFeet |
|
||
|
we just made a new connection with the cig/lighter and the trip computer shows the time very fanitly which is because i havent found the wire to connect the LCD dimmer signal, but all my gauges wont work still, eg, speedo, RPM's, fuel, temp and how many km's my car has done, the display for that lights up but nothing is shown..
|
||
| Top | |
||
| Krytox |
|
|||
|
I'd be concentrating on the Batt fuse in the engine bay, and the INS BAT fuse (3rd vertical top row)
There must be an error in your wiring for it to blow. Also did you cut the white wire on the Trip Computer plug, if not, do it.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| ChickenFeet |
|
||
|
yeah i cut the white wire
shouldnt everything be out if the batt fuse blew? and i can start the car fine. Last edited by ChickenFeet on Wed Jan 14, 2009 11:28 pm, edited 1 time in total. |
||
| Top | |
||
| ChickenFeet |
|
||
|
i put everything back to how it was before i started and all the dials still doesnt work...
is the right hand side connector the one that makes all those work?, ill check again in the light tomorrow about my wiring, but imm 99% sure that isnt the problem, ill keep you posted, thanks for the help so far to fella's |
||
| Top | |
||
| ChickenFeet |
|
||
|
all fixed, there was a fuse that was broken just at the top, very hard to see... thanks people for your help.
the falcon is running again  :):):):):)
|
||
| Top | |
||
| Krytox |
|
|||
|
which fuse exactly? It may help other people.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 59 guests |
