|
| stomper |
|
|||
|
Ok guys. There are heaps and heaps of posts about the LED conversion. I read the doco and it says that i can not use the holders for the ash tray and all that.
Now setting. I was pulling apart my dash and when i did i found my ash tray lamp to be blown BOM BOM BOOOOOM!!! So what i did was soldered the LED to the Resistor and covered that in heat shrink. Then i got the lamp holder and cut as much as i could from the inside then used a soldering iron to make it bigger. Then i placed the LED and glued it abit to make it stay. Put on wires and connected it to the wires in the dash and now i have a green ash tray light. Also around the cig lighter its a nic lit up green.
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| Davehimself |
|
|||
|
is this a question or statement or what?
if it's a statement where's the pics?
_________________
|
|||
| Top | |
|||
| stomper |
|
|||
|
its a statement. Sorry about pics i can go take a picture of the final product. It just accidently happened. I didnt plan on doing it so it worked. LOL. but it did. Need camera. Ill try tomorrow. Soz bout that
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| shannonwulff |
|
|||
|
yeah this is very similar to what i did. you can also do this to the lights behind the instrument cluster, climate controls and demister light.
_________________ When you do things right, people won't be sure you've done anything at all. |
|||
| Top | |
|||
| Hyena |
|
|||
|
stomper wrote: i did was soldered the LED to the Resistor and covered that in heat shrink. Then i got the lamp holder and cut as much as i could from the inside then used a soldering iron to make it bigger. Then i placed the LED and glued it abit to make it stay.
Whoa, break through! Next thing you'll be telling us you've come up with a new way to make sandwiches by getting 2 pieces of bread and putting filling in the middle! 
_________________
|
|||
| Top | |
|||
| Big Kev |
|
|||
|
Hyena wrote: stomper wrote: i did was soldered the LED to the Resistor and covered that in heat shrink. Then i got the lamp holder and cut as much as i could from the inside then used a soldering iron to make it bigger. Then i placed the LED and glued it abit to make it stay. Whoa, break through! Next thing you'll be telling us you've come up with a new way to make sandwiches by getting 2 pieces of bread and putting filling in the middle! lol aww bit rough mate 
_________________ For Sale: 25 Farad Rockford Fosgate Competition Series Carbon Cap, more to come - pm me if interested |
|||
| Top | |
|||
| stomper |
|
|||
|
hey guess what. I found if you get a bread roll and cut it in half. YES HALF. you can put things in the middle and you have a sandwich.
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| Davehimself |
|
|||
|
i kinda get the impression if you post something silly it seems to attract the best comments LMAO
The other day i found if i lift the lid on my scanner and put a pic in it will scan it.
_________________
|
|||
| Top | |
|||
| Davehimself |
|
|||
|
Edited because little kids annoy me
_________________
|
|||
| Top | |
|||
| stomper |
|
|||
|
Davehimself wrote: i kinda get the impression if you post something silly it seems to attract the best comments LMAO
The other day i found if i lift the lid on my scanner and put a pic in it will scan it. Find that hard to believe if you are using windows. LOL. Had to add it. THE REAL reason this thread was started was because the doco said that you can not used the original holder. And seeing as there are many people there that dont know as much about one thing compared to another doesn't mean you have to go and make comments involving bread and sandwiches. I my self know a bit about electronics that some here may not know. But people here know a lot about Forced Induction and really i know f**k all about it. GODDAMN IT!!!
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| Hyena |
|
|||
|
stomper wrote: doesn't mean you have to go and make comments involving bread and sandwiches
I apologise, I should have never dragged carbohydrates into this
_________________
|
|||
| Top | |
|||
| stomper |
|
|||
|
s**t happens LOL. Talking about carbohydrates, my teacher is talking about carbon oxygen and hydrogen being a carbohydrate
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 82 guests |
