|
| RUXT0N |
|
|||||
|
I was well aware that my seat was screwed and I didn't think it would pass roadworthy. So anywho i went to get my car roadworthy a few days ago and my seat failed me D:
I'm just going to get it welded back, or is there any other way to fix it?
|
|||||
| Top | |
|||||
| ef_falcon_95 |
|
|||
|
Exact same thing happened to me , resulting in a wobbly seat base.
_________________ El XR6 Turbo |
|||
| Top | |
|||
| RUXT0N |
|
|||
|
Yea it's a pain in the butt! Sometimes when I brake it will throw me a tad forward -.- How did you go about fixing it if you have?
|
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
It's not fixed. , been like it for 2 years lol doesn't bother me to much , but if there's a easy fix ill fix it.
_________________ El XR6 Turbo |
|||
| Top | |
|||
| RUXT0N |
|
|||
|
Alright, well I didn't pass roadworthy because of it so I have to fix it, I am just going to get it welded on.
|
|||
| Top | |
|||
| SWC |
|
||
|
Replace the base. Cloth Trim just pops off and easy to fit. 4 Allen head bolts hold it in.
|
||
| Top | |
||
| Chargd |
|
|||
|
mines the same, i just got my mates fat missus to sit on it, it hasnt moved in 12 months
_________________ 95 Ef Gli, mods : Tickford Head, Tickford ecu, Pacemaker 4499, Venom 100 cpi cat, Redback 2.5" catback, Wade 977b cam, ba xr6 intake and SS inductions, k & n filter & leather seats. 147.5kw @ wheels |
|||
| Top | |
|||
| RUXT0N |
|
|||
|
I have to get it repaired quick so I think welding it is the quickest option?
{USERNAME} wrote: mines the same, i just got my mates fat missus to sit on it, it hasnt moved in 12 months LOL |
|||
| Top | |
|||
| Chargd |
|
|||
|
if you were in vic, i could of given you a seat to pass roady
_________________ 95 Ef Gli, mods : Tickford Head, Tickford ecu, Pacemaker 4499, Venom 100 cpi cat, Redback 2.5" catback, Wade 977b cam, ba xr6 intake and SS inductions, k & n filter & leather seats. 147.5kw @ wheels |
|||
| Top | |
|||
| RUXT0N |
|
|||
|
Well I live on the NSW/VIC border lol, I also need 1 good enough stocky tyre to pass
|
|||
| Top | |
|||
| Benno The Viking |
|
||
|
Mine did the same thing, it was annoying so I fixed it. I did this by taking the seat out, the cushion and the cover and all that off, and the seat-pan bit out (the part that the bolts have ripped through) and flattened the torn part down, then welded some big washers to it, then just put it all back together. It didn't take too long, just make sure you have the washers lined up well or it will be a PITA to get back together.
_________________ Build Thread |
||
| Top | |
||
| hans hartman |
|
||
|
i just welded some5-6 mm flat bar,to cover the holes,and then drll and tap the bars.the nuts are barely welded.
_________________ R.I.P HANS HARTMAN |
||
| Top | |
||
| RUXT0N |
|
|||
|
{USERNAME} wrote: Mine did the same thing, it was annoying so I fixed it. I did this by taking the seat out, the cushion and the cover and all that off, and the seat-pan bit out (the part that the bolts have ripped through) and flattened the torn part down, then welded some big washers to it, then just put it all back together. It didn't take too long, just make sure you have the washers lined up well or it will be a PITA to get back together. So you took out the screws, welded the washers onto the seat-pan and put the screws back in? |
|||
| Top | |
|||
| Benno The Viking |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: Mine did the same thing, it was annoying so I fixed it. I did this by taking the seat out, the cushion and the cover and all that off, and the seat-pan bit out (the part that the bolts have ripped through) and flattened the torn part down, then welded some big washers to it, then just put it all back together. It didn't take too long, just make sure you have the washers lined up well or it will be a PITA to get back together. So you took out the screws, welded the washers onto the seat-pan and put the screws back in? As far as I remember. The nuts are on the bar as far as I can tell from the picture?
_________________ Build Thread |
||
| Top | |
||
| Chargd |
|
|||
|
{USERNAME} wrote: Well I live on the NSW/VIC border lol, I also need 1 good enough stocky tyre to pass dam, im near dandenong and got both haha
_________________ 95 Ef Gli, mods : Tickford Head, Tickford ecu, Pacemaker 4499, Venom 100 cpi cat, Redback 2.5" catback, Wade 977b cam, ba xr6 intake and SS inductions, k & n filter & leather seats. 147.5kw @ wheels |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 37 guests |
